[rs@chip]

Hello all.. I have trobale of reading psg16 with carprog..I cant read it on K-line and can..someone now the solution how to read it on a car by obd?I need pin code for adapt keys..thanks..

[wieslov]

Check A1 adapter

http://cartechnology.co.uk/showthread.ph...ht=carprog

[bouizanne]

Hi friends , i need dump PSG16 , i have FGtech V54 , kess V2 , J-LINK ,X-PROG, tl866 , willem , can i make it with these tool ? thank


this pinout is correct and full ?

[rs@chip]

Here is my psg16 file and pin if this can help you : 8356 good luck !

[bouizanne]

Here is my psg16 file and pin if this can help you : 8356 good luck !

hi friend very thank for your help , but it is zafira 2.0 DTI 2003 bosch 0281011055, your engine is 2.2 i'm not sure it's same file , how you dump this file ? in pump ECU ? or there are motor ECU in your car behind the wheel , i can't find mine in this zafira

[rs@chip]

You can try I am not sure too..but you need op-com to reset and adapt new pump..

[bouizanne]

Ok i have OP-COM but how write your file , i think your car you have motor ECU behind wheel , the file come of this ? but i don't have or i can't find it in this car

[rs@chip]

I do it with carprog..by obd..and what is the problem with your car...you changed the pump?

[bouizanne]

The motor was changed with her pump , and i don't have code pin for adapted the key

[rs@chip]

Post your file from cid eep 93c56 and your vin I try to help you