Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford KA 2 self-teaching trigger wheel
|
20-01-2024, 10:50 AM,
Post: #1
|
|||
|
|||
|
Ford KA 2 self-teaching trigger wheel
hi
need help with a Ford KA 2 , mj 2011, 1,2l Fiat engine. i work with org ids, online, vci is vmm, have key card from car. after changing pcm to a new one, org Ford, car starts but there is P1300 and it is not possible to learn the trigger wheel. all other things were possible to learn with ids. tried many times : temp 80, three times over 6000rpm, ign. off , no way. after reprog the same. does someone know what to do? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
20-01-2024, 19:44 PM,
Post: #2
|
|||
|
|||
|
RE: Ford KA 2 self-teaching trigger wheel
Have you tried with forscan ?
Also did you do RESET KAM |
|||
|
|
|
25-01-2024, 22:45 PM,
(This post was last modified: 25-01-2024, 22:50 PM by Tomate.)
Post: #3
|
|||
|
|||
|
RE: Ford KA 2 self-teaching trigger wheel
hi!
i tried forscan but it dosen`t work with KA II (mj 2013). this car is looks like a Ford but is Fiat 500! and i reset all. KAM is KA mj 1996- Keep Alive Memory  can someone make me dtc off for this Marelli 9GF? i need dtc off P1300. it is not possible to learn self teaching trigger wheel. i tried with ids (newest 130.2) and bosch kts. ids gives me an error (no dtc, pc-error!): parameter on byte position 39 is falling. is that coolant temperature? I think so. This is not shown in the regular log either! But in the OBD protocol it is! Crazy!? The Ford-Fiat agreement is certainly the problem - software bug?! Does anyone know anything about this? |