Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog 3 no conection
13-11-2015, 03:19 AM,
Post: #11
|
|||
|
|||
RE: Digiprog 3 no conection
I used dp3 for 2 years and it worked perfect obd. Now it doesn't work via obd with any car. Is there a timer inside the machine that shuts down the machine.
|
|||
13-11-2015, 05:20 AM,
Post: #12
|
|||
|
|||
RE: Digiprog 3 no conection
No, and if you got two years out of it, just buy a new one, that one doesn't owe you anything.
If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
13-11-2015, 12:13 PM,
Post: #13
|
|||
|
|||
RE: Digiprog 3 no conection
(13-11-2015, 03:19 AM)Acvigs Wrote: I used dp3 for 2 years and it worked perfect obd. Now it doesn't work via obd with any car. Is there a timer inside the machine that shuts down the machine. ur programmer OBD II life time finished now u need to buy a new programmer that is ur solution Nothing will remain in this World , Everything will come to END!
THINK POSITIVE NOTHING IS IMPOSSIBLE |
|||
15-11-2015, 13:00 PM,
Post: #14
|
|||
|
|||
RE: Digiprog 3 no conection
Digiprog k-line repair solution
|
|||
15-11-2015, 14:25 PM,
Post: #15
|
|||
|
|||
RE: Digiprog 3 no conection
|
|||
15-11-2015, 15:34 PM,
Post: #16
|
|||
|
|||
RE: Digiprog 3 no conection
Yes test and report
|
|||
16-11-2015, 07:30 AM,
(This post was last modified: 16-11-2015, 07:33 AM by forkade.)
Post: #17
|
|||
|
|||
RE: Digiprog 3 no conection
LOOK yours resistor is good
digiprog pinout function |
|||
18-11-2015, 12:46 PM,
Post: #18
|
|||
|
|||
RE: Digiprog 3 no conection
I have quality digi prog 3 and still no connection error appears via obd.
|
|||
27-11-2015, 23:18 PM,
Post: #19
|
|||
|
|||
RE: Digiprog 3 no conection
Some have it after 1 week. some after 2 years. some never
|
|||
29-11-2015, 20:22 PM,
Post: #20
|
|||
|
|||
RE: Digiprog 3 no conection
Hello I am wondering if anybody can help me? my digiprog has bluescreened! but
All the information I read about blue screen on a digiprog relates to a failed update... Here is what happened last week I did a 57 a3 with v4.94 the dash went into boot. (Black no display no crank) so I unplugged digiprog plugged back in and repeated the procedure. Dash come back to life with required mileage. Job done. 10 minutes later I plugged into a different vehicle. (w2014) My screen was Blue and won't go into the menu... now I have had this before on this particular digiprog to fix it all I had to do was unplug and connect it again all would be well... Not anymore Blue screen stays no matter how many times I try to power off and on. Now not sure what to do here as I already meantion all threads on Blue screen relate to failed or interrupted update. Thank you all for any tips |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content