[BS68]

Hi friends

I tried to program extra blade key on Nissan Juke 2012 J15. Unfortunately, although everything was ok according to Im508, the car is stuck with the key light permanently and does not start. 

The starter won't even crank. The BCM number is not on the blacklist at least i have not found a problem with this BCM number: 284B1-1KBOC. 

I am attaching the reading of the 93C66 and numbers in the glove box, of course i am ready to pay for the service.

Respect.

[raffy haddad]

Blade key usually no prob with bcm number only bcm with smart key
Try to use other tool to relearn orig key

[BS68]

Hi Raffy

Thank you very much, i have 2 permanent faults B2191 and B2192, i will try to use other tools to remedy them.

Respect to you.

[BS68]

Hello friends 

Still struggling with this Juke.

Uses Im608, Zedfull, Launch, impossible to learn a key, i generated 2x 7936A ID46 transponders still not possible, writes the key dumps directly to Eeprom BCM ori, still the same, bought a BCM second hand and swap eeprom still the same thing, immo light + no start.

I read eeprom BCM donor if colleague could correct the dump in order to successfully learn the new transponders i would make a payment without problem.

Thank you.

[BS68]

I also read the ori eeprom after adding the 2x dump key generated by Autel.

[ombra]

Write this and add the keys from obd and tell me the result. 
pass PM box.