[DavidT]

hi
i tried odometer corection on mb sprinter 2009 my
after flash ignition doesnt work any more
i read write eeprom in EDZ with vvdi prog
if someone can check if flash is corupted , i forget to save original flash
  ESZ part no A9065456408

[pepi]

You have bad eep data here.
Here you have good eep data from the same label, 
I hope you did not touch the flash.
If you use this eep data you will need to ;
-Make new key
-Reset ESL
-Reset ECU adapt and activate 
- Sync dashboard with EZS