Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

J-Link V8 - Recovery and Conversion to Ori
21-07-2015, 06:17 AM,
Post: #1
fantomel Away
Super Moderator
**
Super Moderators 		Posts: 796
Threads: 105
Threads: 105
Thanks Received: 12,095 in 690 posts
Thanks Given: 670
Joined: Oct 2013
Reputation: 4,930
00Windows  J-Link V8 - Recovery and Conversion to Ori
[Image: segger_seggerlogo2c.jpg]
Since i got this programmer, and managed to work with it, i have managed to make it like ori and also as no one tells you, each clone from china if it's used with software newer then 4.24 it will brick.
Here you have recovery procedure and how to make it ori, all done on USB port.
[Image: J-Link_PLUS_Classic_729x792.png]

Like this you can use this programmer even with the latest program version.


Attached Files
Recovery J-Link V8 by Fantomel.txt
File Type: .txt
Downloaded: 75 times
Size: 121 bytes

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +33 - daxxer [+1] , 23Andi23 [+1] , giiintas [+1] , milanoffracing [+1] , mdanilo [+1] , domelec [+1] , banoo [+1] , McMihai [+1] , ivica21 [+1] , titoun [+1] , dob12 [+1] , bounce24 [+1] , michalkow [+1] , mikroel [+1] , tehnosoftex [+1] , WhiteAndBlue [+1] , mcm44 [+1] , ocostel [+1] , Moto_Mike [+1] , uranuss [+1] , dil6222 [+1] , nek13 [+1] , karmazyn [+1] , GAZOWNIK [+1] , antonypaul [+1] , simo84 [+1] , paganini [+1] , evgenijj [+1] , dabaca [+1] , foulou0238 [+1] , gcesare21 [+1] , blagf [+1] , kila68 [+1]
Quote this message in a reply
[+] 95 users say Thank You to fantomel for this post
28-09-2016, 13:40 PM,
Post: #2
vwdamian Offline
Member
Members 		Posts: 240
Threads: 92
Threads: 92
Thanks Received: 75 in 53 posts
Thanks Given: 200
Joined: May 2016
Reputation: 28
RE: J-Link V8 - Recovery and Conversion to Ori
Hello fantomel.
I have a problem,
gives command Exec SetSN= is not my number programmer.
please help my


Attached Files
20160928_151610.jpg
File Type: .jpg
Downloaded: 88 times
Size: 3.84 MB

Quote this message in a reply
[+] 1 user says Thank You to vwdamian for this post
28-09-2016, 14:52 PM,
Post: #3
domelec Offline
VIP Donator
******
VIP Donators 		Posts: 910
Threads: 12
Threads: 12
Thanks Received: 1,518 in 538 posts
Thanks Given: 2,237
Joined: Feb 2014
Reputation: 569
RE: J-Link V8 - Recovery and Conversion to Ori
Did you not read the instructions correctly?
you are not entering a serial
your pic shows you trying to set a sn of nothing
if my post helps please give Reputation under and Thanks under
Quote this message in a reply
24-03-2017, 17:19 PM, (This post was last modified: 24-03-2017, 17:21 PM by mikroel.)
Post: #4
mikroel Offline
Member
Members 		Posts: 487
Threads: 39
Threads: 39
Thanks Received: 383 in 131 posts
Thanks Given: 126
Joined: Apr 2016
Reputation: 140
RE: J-Link V8 - Recovery and Conversion to Ori
Fantomel you are GENIUS
Thank you very much.

I just did update to my Segger J-Link to the BASE version, and it seems to me that it works very well with the latest version of J-Flash v6.14.
Firmware update via the J-Link Configurator went well and fast.
Quote this message in a reply
[+] 2 users say Thank You to mikroel for this post
23-11-2018, 21:05 PM, (This post was last modified: 23-11-2018, 21:54 PM by uranuss.)
Post: #5
uranuss Offline
Member
Members 		Posts: 68
Threads: 10
Threads: 10
Thanks Received: 40 in 13 posts
Thanks Given: 22
Joined: Feb 2014
Reputation: 9
RE: J-Link V8 - Recovery and Conversion to Ori
I made like in manual but i can`t erase chip. I put jumper on RESET for 1 minut. Unplug usb cable. Change to TST, plug the cable back (unknow usb device shows). Disconneted cable removed jumper than plug cable back again. J link driver shows in device manager as should be (no any new com port).
What a f???

My j-link:
http://www.lxxtech.com/jlink-v8-emulator...-p750.html


I got it. No more then 5 sec for reset.
Quote this message in a reply
29-08-2022, 15:05 PM,
Post: #6
ristici Offline
Member
Members 		Posts: 11
Threads: 2
Threads: 2
Thanks Received: 1 in 1 posts
Thanks Given: 40
Joined: Mar 2014
Reputation: 0
RE: J-Link V8 - Recovery and Conversion to Ori
(21-07-2015, 06:17 AM)fantomel Wrote:  [Image: logo.png]
Since i got this programmer, and managed to work with it, i have managed to make it like ori and also as no one tells you, each clone from china if it's used with software newer then 4.24 it will brick.
Here you have recovery procedure and how to make it ori, all done on USB port.
[Image: j-link-base_image0.jpg]

Like this you can use this programmer even with the latest program version.

please reupload link is dead
Quote this message in a reply
30-08-2022, 08:10 AM,
Post: #7
blagf Offline
Member
Members 		Posts: 23
Threads: 10
Threads: 10
Thanks Received: 4 in 5 posts
Thanks Given: 130
Joined: Sep 2017
Reputation: 3
RE: J-Link V8 - Recovery and Conversion to Ori
please reupload link is dead
Quote this message in a reply
30-08-2022, 14:00 PM,
Post: #8
lupu_sandu Offline
Master of the IMMO
******
VIP Members 		Posts: 577
Threads: 14
Threads: 14
Thanks Received: 758 in 377 posts
Thanks Given: 210
Joined: Apr 2018
Reputation: 557
ZSeat  RE: J-Link V8 - Recovery and Conversion to Ori
Archive from 1st post splitted in 3 and attached here.
Reputation: +2 - blagf [+1] , justdiag [+1]
Quote this message in a reply
[+] 2 users say Thank You to lupu_sandu for this post
30-08-2022, 18:26 PM,
Post: #9
justdiag Offline
Super Moderator
**
Super Moderators 		Posts: 891
Threads: 39
Threads: 39
Thanks Received: 3,776 in 730 posts
Thanks Given: 1,001
Joined: Mar 2018
Reputation: 2,112
RE: J-Link V8 - Recovery and Conversion to Ori
(30-08-2022, 14:00 PM)lupu_sandu Wrote:  Archive from 1st post splitted in 3 and attached here.

Let's not kill the CT database with so many magas smile
Added new link in 1st post.
If you think i helped you please do take 1 second and press THANKS button thumbsup
Quote this message in a reply
[+] 2 users say Thank You to justdiag for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
VToyota KESS RECOVERY FILE FROM STOCK FILE HINO 89663-37783 Black Alien 0 209 04-12-2023, 08:02 AM
Last Post: Black Alien
WHyundai Hyundai/Kia Immo off Tool v1.0 need link for download beg1 2 508 17-11-2023, 18:16 PM
Last Post: danyguit2000
  Solved ✔ E87 cas2 eep recovery 3inferno3 2 966 24-01-2023, 13:12 PM
Last Post: 3inferno3
  Mega link for FVDI2018 Sn0w3y 3 769 16-08-2022, 05:16 AM
Last Post: mkii
YTMercedes W906 EIS eeprom corrupted - RECOVERY gibdani96 3 1,010 21-03-2022, 10:31 AM
Last Post: 12manux
XZBMW BMW CAS4 Dead EEPROM Recovery AGM_E87 2 1,215 28-10-2019, 19:56 PM
Last Post: brend
YTMercedes Solved ✔ E93 325i to 330i N53 conversion now 2AF4 Incorrect data record mr_nitroz 3 824 17-07-2019, 10:19 AM
Last Post: mr_nitroz
  J-link problem gobe 0 357 22-03-2019, 13:14 PM
Last Post: gobe
  Need help for Recovery FEM BMW 118d alexbcn 0 297 05-03-2019, 09:38 AM
Last Post: alexbcn
0Immo Yamaha tmax 2015/16 Keyless model immo off or conversion to fisical key mexanico1971 7 4,106 17-03-2017, 16:23 PM
Last Post: raffy haddad

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content