[BS68]

Hi friends

I'm struggling with a ME7.5.10 eeprom and can't complete my mission. 

I have to change a cluster which has burnt circuits on the PCB, the fuel gauge does not work, original RBx cluster with 3 digit pin donor B00 with 4 digit pin.

The eeproms are different from the PCB too. I am trying to adapt the donor cluster with vcds using the donor PIN but unable to pass the step (Channel 50 vcds). 

So i disassemble the ME7 and change the 4 bits for immo off on eeprom 95040, I use the donor cluster, the car starts the first time then doesn't start anymore. I put the original file back with the original cluster, the car will start once then won't start again. 

What am i doing wrong please ? 

Thanks in advance for any advice. 

[Gabriel87]

Read eeprom and put here and i help you

[BS68]

Thank you for the help, respect to you.

[ROD-BENDERS]

Thank you for the help, respect to you.

report please

Br

[BS68]

With ROD BENDERS, it always works without stress

Thank you very much, it works very well, it's solved.