Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F10 FLA retrofit
12-03-2024, 15:54 PM,
Post: #1
|
|||
|
|||
F10 FLA retrofit
Hi there
I acquired an FLA camera from a PreLCI 6’ to install in my 5’ I bought the prcLCI FLA camera with the separate 2 pin wiring to match the car I have retrofitted an NBT without anything other than a 4SK ZGW. Everything works for the mirror from what I can tell (car is in storage for the winter) I installed the camera and wired it in. I reused the original 10pin that plugged right in and wired up KCan H/L from the second 3 pin plug to an unused KCan1 harness from the old 10 pin idrive controller (yellow/green high to mirror pin 1, green low to mirror pin2 as indicated in TIS) The FLA ecu does not show up in SVT when I read ecus from the SVT coding screen. I tried swapping wires and even tried on KCan2 but nothing I do will let the FLA ecu show up in ISTA. Any suggestions? I may try tapping into the can wires behind IHKA if nothing else to rule out the old idrive controller can wires being the cause. |
|||
12-03-2024, 16:44 PM,
Post: #2
|
|||
|
|||
RE: F10 FLA retrofit
Have you edited FA accordingly => 5AC ?
Click Thanks and Reputationif this post helped you.
|
|||
12-03-2024, 17:42 PM,
(This post was last modified: 12-03-2024, 17:50 PM by user_530d.)
Post: #3
|
|||
|
|||
RE: F10 FLA retrofit
If you have FLA with CAN1 you musst connect PIN 1/2. If you have newer one with CAN2 connect PIN 4/5.
You will see in ESYS iif all right connected. You don’t need edit VO to see it in ESYS. If my post helped you hit the thanks and reputation button. Thank you.
|
|||
12-03-2024, 18:39 PM,
Post: #4
|
|||
|
|||
RE: F10 FLA retrofit
I have what I assume to be a can1 version as it has the second harness with 2 pins which I have correctly hooked up to the can bus. Still won’t show in SVT tree but mirror seemingly works as the garage door opener flashes.
Startofortress: doesn’t need to be in FA to show up in SVT tree but none the less it was added to FA and written. |
|||
12-03-2024, 18:42 PM,
Post: #5
|
|||
|
|||
RE: F10 FLA retrofit
Which part number is it?
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
12-03-2024, 22:14 PM,
Post: #6
|
|||
|
|||
RE: F10 FLA retrofit
(12-03-2024, 18:39 PM)beng2k Wrote: Startofortress: doesn’t need to be in FA to show up in SVT tree but none the less it was added to FA and written. I agree, yet for ISTA the updated FA helps to identify assembled modules while E-Sys can handle with less information available. Click Thanks and Reputationif this post helped you.
|
|||
12-03-2024, 23:26 PM,
Post: #7
|
|||
|
|||
RE: F10 FLA retrofit
|
|||
13-03-2024, 04:29 AM,
(This post was last modified: 13-03-2024, 04:30 AM by beng2k.)
Post: #8
|
|||
|
|||
RE: F10 FLA retrofit
Couldn’t find any part number without opening it? This is all I could see in terms of numbers but clearly don’t align with bmws system.
(12-03-2024, 22:14 PM)Stratofortress Wrote:(12-03-2024, 18:39 PM)beng2k Wrote: Startofortress: doesn’t need to be in FA to show up in SVT tree but none the less it was added to FA and written. My bad I wrote ista not esys |
|||
13-03-2024, 06:53 AM,
Post: #9
|
|||
|
|||
RE: F10 FLA retrofit
This is old CAN1 Version with part number 51169228258
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
13-03-2024, 07:39 AM,
Post: #10
|
|||
|
|||
RE: F10 FLA retrofit
Probably 4SK ZGW not expecting FLA on CAN1?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 288 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 50 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 249 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 412 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 110 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 222 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 103 |
08-05-2024, 14:22 PM Last Post: hitit |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 892 | 471,104 |
07-05-2024, 04:30 AM Last Post: SkeYT |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,641 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 715 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content