[Twointje]

I installed ISTA on another PC. but get the same problem with connection to car.

---

I still don’t understand how to solve the problem?

again, i can offer  you that you just put it on tv and i will have a look on it

best regards

---

for free, just for help

I don't really understand how I should do this?

With the program Teamviewer or Anydesk.

[palapas1974]

Ok. anydesk 1496224927. Connect to ICOM6 192.168.6.171 VIN J168390. This is FEM connected on the table.

[kiranabc]

I installed ISTA on another PC. but get the same problem with connection to car.

---

I still don’t understand how to solve the problem?

again, i can offer  you that you just put it on tv and i will have a look on it

best regards

---

for free, just for help

I don't really understand how I should do this?

With the program Teamviewer or Anydesk.

i prefer tv

[palapas1974]

I confirmed the connection

[kiranabc]

please make it again

[palapas1974]

I confirmed the connection

[PUMUKY1]

ISTA 4.46.14 Standalone works fine on an I7 16GB laptop.

On an I7 16GB desktop PC, same configuration as the laptop, it doesn't work, always the same error.

Could it be because of the screen?

[kiranabc]

ISTA 4.46.14 Standalone works fine on an I7 16GB laptop.

On an I7 16GB desktop PC, same configuration as the laptop, it doesn't work, always the same error.

Could it be because of the screen?

i try a lot and is nor the screen, if you start once the other gui and copy the original back all will work,

but i dont know

[PUMUKY1]

ISTA 4.46.14 Standalone works fine on an I7 16GB laptop.

On an I7 16GB desktop PC, same configuration as the laptop, it doesn't work, always the same error.

Could it be because of the screen?

i try a lot and is nor the screen, if you start once the other gui and copy the original back all will work,

but i dont know

I don't understand what you mean by: Start the other GUI once and copy the original

[Homersbud]

i’m able to get 4.46.14 working using the steps provided; however, when using kdcan cable, ista shows errors in a few modules (there is no errors) as if I use enet, no errors and using the same kdcan cable on an older version of ista, there are no errors in any modules.

i have tried all different fixes - installed latest bmw standard tools 2024 which has latest ediabas 7.6 & no difference.