[fluorescent]

Pin: 8513        VIN: W0L0XCE7544391381

programing new ecu with old data from 93c66 not start immo active
the content of donor eeprom ecu is like this, mabe reseted ?

No pin in donor ecu -wrong file. If the two ECUs are the same, write the eeprom from old to new ECU.    Remember there are two buttons and it takes seconds. Everyone gives their time to help.

ecu donor is denso 112500-0201 isuzu 898000-3221
ecu original is denso 112500-0164 issuzu 897350-9486 

i think are compatible
already swap data from old to new but immo flashing
also i think i have security time wait active 
i let it this night with power

You saved the 93c66 from new ecu before writing 93c66 from the old one?

the new one came like that with that dump that i send you , i think it was touched before
so do you think i need to buy another one if i dont have the thr corect data or i can write old data from car an try reset

[fluorescent]

meriva 1.7 cdti denso donor x16.rar
File Type:
Downloaded:	2 times
Size:	475 bytes

ok buyed donor ecu , need pincode to reset it pls

[lupu_sandu]

Pin code: 6793.....