[Maikiu]

Hello. Is possible clone Tiguan cluster 2012 on bench? Im reading about this but i didnt get a clear information about that. Inside the cluster is a mcu a2c30274400 (d70f3426) and eeprom 24c64. I have got two clusters, same part number. Car is not here. Looks like mcu cluster read is locked. Is any way or tool to clone it?

I think adapt it with odis is also not possible right (need authorization)? Or is any way to virgin eeprom and code it online with odis?

Thanks in advance

[pepi]

Yes ,you will need setup bench with cluster plug and also key ring connected .
I usually do it with AVDI

-Connect ori dash , enter service mode read immo data save
-Connect spare dash , enter service mode (you will need key from the same dash or you need to take
out for programming 24c64) , write original immo data.

[Maikiu]

Finally I did it with Autel IM and GBox, read pin and cs of both dashes on bench and use the function "replace immo 4" (also code power class and vin). After that you only need to adapt keys. Need to edit mileage now but that is another history.