Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Megane 2 add new cards + coding
28-07-2015, 14:16 PM,
Post: #1
|
|||
|
|||
Megane 2 add new cards + coding
Helo m8s..I have changed the uch+ecu+cards set and car work normaly..but now I have to lock and unlock the car manualy with card.before with old uch car opened(unlock) itself when card was near the car and I dont need to do it manualy..Is posible to code that function and how if someone can help plz..?I now how to do it on vag by long coding..Thanks in advance
|
|||
28-07-2015, 15:37 PM,
Post: #2
|
|||
|
|||
RE: Megane 2 add new cards + coding
Yes it can be done with CAN clip sonde
It`s your job to find the PIN code of the car ( RPE2 does not work for Meganes I-II-III...) necessary for doing the job. It`s as you would reprogram the cards as if they are new. |
|||
28-07-2015, 20:46 PM,
Post: #3
|
|||
|
|||
RE: Megane 2 add new cards + coding
Ok no problem for pin code I will extract it..But how to add function in uch..I wont the car recognize card 2meters near car..that s how it was before replacing uch..I cant fint that function in clip..thanks
|
|||
28-07-2015, 21:10 PM,
Post: #4
|
|||
|
|||
RE: Megane 2 add new cards + coding
If I understand well,new cards came with new uch and ecu. Perhaps you do not have handsfree function in new uch and cards? Check which type of pcf is in old cards and which type in new. If it is pcf 794 it is with handsfree function. Pcf 7946 or 7947 is without handsfree.
|
|||
28-07-2015, 21:28 PM,
Post: #5
|
|||
|
|||
RE: Megane 2 add new cards + coding
Yes but I replaced the set of ecu-uch-cards from used car..probably is without handsfree function..shit..is any chance to add handfree function?thanks
|
|||
02-08-2015, 17:41 PM,
Post: #6
|
|||
|
|||
RE: Megane 2 add new cards + coding
Steel loking for solution....
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content