Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Disable Start Stop F25 X3
31-07-2015, 18:27 PM,
Post: #1
|
|||
|
|||
Disable Start Stop F25 X3
I have little problem with disable start stop in F25 - X3.
I add OMSA to HO-word in E-sys, change MSA_memory & MSA_default on active in cas, but button S&S system reset when ignition is off, no light when ignition on, I must manual off, don't remember last config. Any idea ? Thx for help. |
|||
31-07-2015, 22:11 PM,
Post: #2
|
|||
|
|||
RE: Disable Start Stop F25 X3
When doing this on other chassis. you shouldnt have to activate msa_default on. Only msa_memory to active.
|
|||
26-06-2016, 18:39 PM,
Post: #3
|
|||
|
|||
RE: Disable Start Stop F25 X3
Hi carat10,
Did You manage to solve Your problem? I had the same issue recently, tried with OMSA, MSA_MEMORY and even MSA_DEFAULT_OFF, but every time after turning the engine on the AutoStartStop button LED is off (which means that ASS is enabled). The same thing worked without any trouble on a couple of F10s... Thanks. Regards,
MicRofT BMW diagnostics and coding help in Warsaw/Poland (ISTA, Esys). Please do not share/publish my links anywhere without my knowledge. |
|||
26-06-2016, 20:07 PM,
Post: #4
|
|||
|
|||
RE: Disable Start Stop F25 X3
If the MSA memory function isnt working properly, update your cars software if the i-level is beforte 13-07. MSA coding wont work before that.
|
|||
26-06-2016, 21:54 PM,
Post: #5
|
|||
|
|||
RE: Disable Start Stop F25 X3
For Auto Start Stop (ASS), you usually set either TCM_MSA_DEFAULT_OFF or TC_MSA_MEMORY, NOT both.
TCM_MSA_DEFAULT_OFF (FEM_BODY for F20/F30, BDC_BODY for F15/F25)
|
|||
27-06-2016, 11:09 AM,
Post: #6
|
|||
|
|||
RE: Disable Start Stop F25 X3
Normaly, it´s enough to add "OMSA" to HO-Wort of VO and code CAS or FEM.
|
|||
28-06-2016, 16:03 PM,
Post: #7
|
|||
|
|||
RE: Disable Start Stop F25 X3
Hi,
Thanks for Your answers. I'm aware, more or less, of possible ways to disable ASS. My problem is that neither TC_MSA_MEMORY, TC_MSA_DEFAULT_OFF nor OMSA did not work on the F25 car I tried. The car's i-Level is F025-11-03-511. Other coding options, even in CAS, worked. Regards,
MicRofT BMW diagnostics and coding help in Warsaw/Poland (ISTA, Esys). Please do not share/publish my links anywhere without my knowledge. |
|||
28-06-2016, 19:39 PM,
Post: #8
|
|||
|
|||
RE: Disable Start Stop F25 X3
Need newer software. Doesn't work until I level 13-07
|
|||
28-06-2016, 22:06 PM,
Post: #9
|
|||
|
|||
RE: Disable Start Stop F25 X3
You need a code from BMW.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
28-06-2016, 22:13 PM,
(This post was last modified: 28-06-2016, 22:15 PM by MicRofT.)
Post: #10
|
|||
|
|||
RE: Disable Start Stop F25 X3
OK. I will try to organise an upgrade place for my friend and return here with some feedback.
Thanks (28-06-2016, 22:06 PM)Fx82 Wrote: You need a code from BMW. A code? What code? What for? Regards,
MicRofT BMW diagnostics and coding help in Warsaw/Poland (ISTA, Esys). Please do not share/publish my links anywhere without my knowledge. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content