Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
01-02-2017, 20:52 PM,
Post: #131
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Long plagued this problem happened only once to connect an external router settings 169.254.x.x, respectively mask 255.255.0.0
dhcpsrv I have not win |
|||
24-03-2017, 15:10 PM,
Post: #132
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
25-03-2017, 02:43 AM,
Post: #133
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(24-03-2017, 15:10 PM)zfrepairtm Wrote:(18-11-2015, 11:53 AM)SweetBMW Wrote: IT is still not fixed Hi,If u have an original icom next now,you can flash NBT by ISTA 4.04.20 with programming database was installed or ISTA/P 3.61.1.001 in direct connection now.if you have ISTA/P 3.61.0.500 you can do it same I think. |
|||
25-03-2017, 08:50 AM,
Post: #134
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(25-03-2017, 02:43 AM)winter Wrote:(24-03-2017, 15:10 PM)zfrepairtm Wrote:(18-11-2015, 11:53 AM)SweetBMW Wrote: IT is still not fixed Can ICOM A2 work with direct connection now also. |
|||
12-05-2017, 19:12 PM,
Post: #135
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(25-03-2017, 02:43 AM)winter Wrote:(24-03-2017, 15:10 PM)zfrepairtm Wrote:(18-11-2015, 11:53 AM)SweetBMW Wrote: IT is still not fixed I have also an original ICOMnext and tried it today direct with newest ISTA P and also with ISTA 4. It still doesn't work with direct connection! |
|||
12-05-2017, 19:29 PM,
Post: #136
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Problem with connection was related to software not Icom
|
|||
03-06-2017, 07:04 AM,
Post: #137
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Is the problem for usw with E-Net Cable still not fixed?
|
|||
03-06-2017, 08:46 AM,
Post: #138
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
07-06-2017, 08:07 AM,
(This post was last modified: 07-06-2017, 08:11 AM by BMWF01.)
Post: #139
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
The software dhcp server tftpd64 did not work for me for AMPT, NBT and KOMBI to be programmed and coded but a Link-sys WRT54G router between laptop and ICOM NEXT. The router was setup as my wifi router with INTERNET DNS going through it, with dhcp ip address set for laptop: 192.168.1.115 and for ICOM ip is 192.168.1.114
The router INTERNET ip is 192.168.1.1 as default gateway for my INTERNET. Laptop ip from Wrt54g Router: ICOM ip assigned by linksys Wrt54G |
|||
Reputation: +1 - DayvG [+1] | |||
16-07-2017, 19:31 PM,
Post: #140
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
This used to work, by having opendhcp run on my laptop and give the ICOM NEXT an IP that was on the same subnet as the laptop. But now its not working anymore... any ideas ??
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Difference 677 vs. 688 F series ? | AlpinWeiss2k18 | 8 | 366 |
16-04-2024, 19:55 PM Last Post: sebastianfernandes |
|
Making F-series combox work in e-series | Ryn079 | 5 | 602 |
11-04-2024, 15:03 PM Last Post: wrp_199 |
|
Lost Navigation - aircon wont turn off 2016 BMW 2 series | DannyDans435 | 6 | 268 |
08-04-2024, 08:45 AM Last Post: painsage |
|
HWEL differences of seat modules (F series) | azwgh | 8 | 251 |
04-04-2024, 21:48 PM Last Post: azwgh |
|
mileage g series virtual bosch id7 | tigre | 2 | 255 |
22-03-2024, 13:00 PM Last Post: tigre |
|
Solved ✔ ISTA Standalone WLAN programming | botho | 4 | 381 |
21-03-2024, 11:13 AM Last Post: botho |
|
G Series KEY in F34 | Rajco | 5 | 414 |
20-03-2024, 18:56 PM Last Post: Rajco |
|
F15 Programming Error | mcrussell | 7 | 453 |
20-03-2024, 05:38 AM Last Post: SweetBMW |
|
BMW X6 E71 Programming | Ryzen | 5 | 267 |
16-03-2024, 12:42 PM Last Post: Node |
|
BMW preLCI G11 - LCI KOMBI retrofit | Volum | 1 | 146 |
14-03-2024, 17:31 PM Last Post: jaramillo |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content