[Fx82]

For the Error in NBT and Kombi - just make a Batterie RESET and Flash it one more time - than works.

The non executable error with ista-p right?
What is exactly a battery reset or do you mean a battery replacement?

[ruben_17non]

For the Error in NBT and Kombi - just make a Batterie RESET and Flash it one more time - than works.

The non executable error with ista-p right?
What is exactly a battery reset or do you mean a battery replacement?

NBT or KOMBI not is possible programing without DHCP server

[acardi]

Hello,
same Problem at two F30. NBT & Kombi are not executeable.

Ista-P & Esys not working with 3.57.004.
I read the Solution with the Batterie Reset. Did someone test it ? working ?

Many Thanks and best Regards Michael

[hulahans]

I think you are the first one with 3.57.004 because nobody shared till now, so you have to wait for answers.

But i am sure that it will work the same as before with dhcp

[acardi]

@ hulahans,
3.57.004 is very simple to have.
the original istallation file and use with the old ista-P loader.
works fine.

but have the same problem with 3.56.1 -5
only kombi and nbt.

if i programm a german car at work, the is no problem like this.

if i have to prgramm an us car with changed VO there is this problem.

i'm from germany and have to code some US Cars to german language.


batterie reset didn't work

[abuqutaita]

I ran into this problem this weekend using ISTA/P 3.56.3. After updating everything else, I used E-Sys with PSdZData from 56.5 (which has the same program and coding for these two ECUs) to complete the I-level upgrade.

[acardi]

No solution but the reason :/
ista-P realease notes 3.57

Programming of control units via Ethernet fails in ISTA/P offline mode
Fault description:
During vehicle handling with ISTA/P in offline mode, the bootloader programming, programming and encoding fail in control units that are programmed directly via Ethernet (e.g. Head Unit High, Rear Seat Entertainment). As a consequential fault, programming of the KOMBI can also fail. Fault code entries are not set.
Model series affected:
F01 (LCI), F02 (LCI), F06, F07, F10 (LCI), F11 (LCI), F12 (LCI), F13, F15, F16, F18, F25 (LCI), F26, F85, F86, I01, I12, F20, F21, F22, F23, F30, F30 HEV, F31, F32, F33, F34, F35, F36, F80, F82, F83, RR4, RR5, F45, F46, F48, F54, F55, F56

[abuqutaita]

Boo, that's the same statement they had for the past several releases of ISTA/P.

[KaiO]

And where's the reason?
This is only the written problem, which we all know anyway.

[acardi]

Kaio, but if we know all the problem, why do so many user ask question about ?
i think, it's ok to know, why there is a problem since 3.56. it's true, the same information is in Realease Note 3.56 but it's already nice to know, that the same bug ist still there an we know, that we can't flash NBT with ISTA-P offline.



If we localized the problem, perhaps some IT Specialists here can fix it.

did you undertand ? ( in know, bad english but enouth to understand i hope )