Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
09-04-2016, 07:45 AM,
Post: #83
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Hi, try this dhcpsrv.ini
Set on an Ethernet card IP address and subnet mask: 192.168.254.1 255.255.255.0 Start dhcp server on notebook and then connect ICOM and turn on 12V. Icom at startup get IP adress from the DHCP server. MiPe [SETTINGS] IPPOOL_1=192.168.254.33-254 IPBIND_1=192.168.254.1 AssociateBindsToPools=1 Trace=1 DeleteOnRelease=0 ExpiredLeaseTimeout=3600 [GENERAL] LEASETIME=86400 NODETYPE=8 SUBNETMASK=255.255.255.0 NEXTSERVER=192.168.254.1 ROUTER_0=0.0.0.0 [DNS-SETTINGS] EnableDNS=0 [TFTP-SETTINGS] EnableTFTP=0 ROOT=C:\DhcpSrv\wwwroot WritePermission=0 [HTTP-SETTINGS] EnableHTTP=1 ROOT=C:\DhcpSrv\wwwroot |
|||
Reputation: +1 - 320ed [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content