Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Autohex II
19-10-2022, 04:32 AM,
Post: #291
RE: Autohex II Technical Support & Feedback
(18-10-2022, 09:31 AM)pepsicola Wrote:  I just find out last week working hour can't be reset on MSV80, I bought the tool base on other user's experience as ease of use and the ability to reset working hour. Is working hour reset gonna expand to the MSVxx DMEs?

There is no tool that will reset working hours on msv80. It is done manually. I have both autohex and bmw explorer (top two tools) and neither will do it. You must develop the ability to overcome obstacles via methods such as research, trial and error, or pay someone for the information.
Quote this message in a reply
[+] 1 user says Thank You to AZCKNCLLC for this post
20-10-2022, 08:37 AM,
Post: #292
RE: Autohex II Technical Support & Feedback
For AutoHex we will be releasing some minor updates hopefully soon. And will try to improve and add more in future.
Visit this user's website
Quote this message in a reply
20-10-2022, 11:12 AM,
Post: #293
RE: Autohex II Technical Support & Feedback
Hello!

I read the words and I hope they become reality.

For example BMW Explorer. ISN reset for DKG F8x and F10, change mileage in G-series cluster via OBD, no red dot on 6WB after eeprom swap. Not everything is released yet but will come very soon. Time for Autohex to improve and add also those nice and helpful features. And the list is not completed. I will not talk about 35160WT/35128WT and Hexprog.

CU Oliver
Quote this message in a reply
[+] 3 users say Thank You to milkyway for this post
21-10-2022, 09:07 AM,
Post: #294
RE: Autohex II Technical Support & Feedback
thank you for your reply we will be looking in to it.
Visit this user's website
Quote this message in a reply
[+] 1 user says Thank You to MTKAutoHex for this post
03-11-2022, 10:52 AM,
Post: #295
RE: Autohex II Technical Support & Feedback
Is it going to be more support on working hour reset?
Quote this message in a reply
04-11-2022, 11:21 AM,
Post: #296
RE: Autohex II Technical Support & Feedback
sorry, for continental dme working hours in bmw we don't have planned yet.
Visit this user's website
Quote this message in a reply
08-11-2022, 16:14 PM,
Post: #297
RE: Autohex II Technical Support & Feedback
(20-10-2022, 08:37 AM)MTKAutoHex Wrote:  For AutoHex we will be releasing some minor updates hopefully soon. And will try to improve and add more in future.

AutohexII users have been hearing these words for maaany months. Maybe it's time to keep your promises and finally do the updates. The subscription is just as expensive and there has been no news in return for months.[Image: devil.gif]
Quote this message in a reply
[+] 2 users say Thank You to Hoborg for this post
09-11-2022, 09:40 AM,
Post: #298
RE: Autohex II Technical Support & Feedback
Hello!

The last "bigger" update of Autohex was in June 2021 (1.0.66). Not really big, only some more supports for EGS. The version 1.0.67 and 1.0.68 were only minor updates (last one in March this year).

In the same time Hexprog went from version 1.0.36 up to 1.0.61. Here we can see where the focus from Microtronik is. Sorry, I do not need an additonal tuning software (and Hexprog goes this way), I need solutions for Autohex. BMW Explorer developed some really interesting features in this time - nothing from Autohex. For the expensive annual fee I can expect more than nothing.

CU Oliver
Quote this message in a reply
[+] 2 users say Thank You to milkyway for this post
10-11-2022, 03:52 AM,
Post: #299
RE: Autohex II Technical Support & Feedback
(09-11-2022, 09:40 AM)milkyway Wrote:  Hello!

The last "bigger" update of Autohex was in June 2021 (1.0.66). Not really big, only some more supports for EGS. The version 1.0.67 and 1.0.68 were only minor updates (last one in March this year).

In the same time Hexprog went from version 1.0.36 up to 1.0.61. Here we can see where the focus from Microtronik is. Sorry, I do not need an additonal tuning software (and Hexprog goes this way), I need solutions for Autohex. BMW Explorer developed some really interesting features in this time - nothing from Autohex. For the expensive annual fee I can expect more than nothing.

CU Oliver
I agree with you...
There are not improvements based on anual fee...Seems we are paying to develop hexprog... I also have the license for that... but also there is an anual fee related to that...
We really need a big improvement, not a minor one or improvements in terms of bug fixes only...
Autohex is a great tool, but seems its really stuck...
Quote this message in a reply
13-11-2022, 01:54 AM,
Post: #300
RE: Autohex II Technical Support & Feedback
Autohex is a good tool
But with some engine control units you can't reset working hours, which I think is a shame.
And when the whole thing is over we have to pay a lot of money to get an update.
Autohex should be further developed.
I think BMW Explorer is faster in development and can do more.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Autohex-unlocking Fem problem tonemoz 22 1,463 17-06-2023, 22:17 PM
Last Post: jaramillo
  BMW BDC replacement with Autohex RaoulK1998 3 353 28-02-2023, 08:17 AM
Last Post: laquangksxd
  ISTA with AutoHex II head? RaoulK1998 0 210 14-02-2023, 13:01 PM
Last Post: RaoulK1998
XZBMW Bmw AutoHex Full Package Vs Bmw Explorer Full psya 30 8,670 12-05-2019, 15:01 PM
Last Post: Jumper
  BMW Explorer or AutoHex need diag06 19 9,036 29-09-2016, 16:40 PM
Last Post: MTKAutoHex

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content