Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Autohex II
17-08-2017, 14:23 PM,
Post: #211
RE: Autohex II Technical Support & Feedback
The most secure and simple way to unlock BMW BDC and FEM.
After you UNLOCK IT, you can:
- Make a new key
- Read / Write ISN
- Write VIN
-....ETC
This video is a true live, we did not cut from it any part... ENJOY

https://www.facebook.com/microtronik/vid...446419512/
Reputation: +3 - volavka [+2] , bara001 [+1]
Visit this user's website
Quote this message in a reply
[+] 14 users say Thank You to MTKAutoHex for this post
17-08-2017, 14:33 PM, (This post was last modified: 17-08-2017, 14:33 PM by volavka.)
Post: #212
RE: Autohex II Technical Support & Feedback
(17-08-2017, 14:23 PM)MTKAutoHex Wrote:  The most secure and simple way to unlock BMW BDC and FEM.
After you UNLOCK IT, you can:
- Make a new key
- Read / Write ISN
- Write VIN
-....ETC
This video is a true live, we did not cut from it any part... ENJOY

https://www.facebook.com/microtronik/vid...446419512/

Great news clapping

Just a Quick Question
after unlock FEM can reset mileage too ? think

Best Regards

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
17-08-2017, 15:10 PM,
Post: #213
RE: Autohex II Technical Support & Feedback
Mileage reset will be possible only on CAS , FEM and BDC
This function will be added in the soon future.
Reputation: +2 - volavka [+2]
Visit this user's website
Quote this message in a reply
[+] 10 users say Thank You to MTKAutoHex for this post
20-08-2017, 10:25 AM,
Post: #214
RE: Autohex II Technical Support & Feedback
AutoHex II BMW Diagnostic Software Version 1.0.44
[Image: Autohex-II-BMW-Configuration_77.png]
Autohex II BMW Diagnostic software update is available for Autohex BMW users.

BDC and FEM key programming is ready for Autohex II HW4. The function can be executed from CAS Firmware, it will generate a secret info file, then it will return the BDC/FEM back to exactly the original state. Autohex II BMW users can use the key programming function to make a key for FEM or BDC modules after they retrieve the secret info file.
BMW configuration with useful options is available now. Expert mode can be activated by the user from this window. more information about these options can be found in our blog.
French, Spanish, Portuguese, Chinese and Korean langauges are fully supported now. German and Turkish are available only in diagnose functions.
Visit this user's website
Quote this message in a reply
[+] 4 users say Thank You to MTKAutoHex for this post
20-08-2017, 13:28 PM,
Post: #215
RE: Autohex II Technical Support & Feedback
Good news that's Autohex hw4 will support BDM-JTAG inlove
Can't wait to test in some modules biggrin

Cheers idea

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 6 users say Thank You to volavka for this post
21-08-2017, 09:21 AM,
Post: #216
RE: Autohex II Technical Support & Feedback
(10-08-2017, 12:44 PM)bawareca Wrote:  It is a 3 minute job.

Took longer than 3 minutes because of downgrade the CAS, but at the end it worked
Quote this message in a reply
[+] 2 users say Thank You to emerer for this post
05-09-2017, 04:45 AM,
Post: #217
RE: Autohex II Technical Support & Feedback
What do you guys use for the 3x 1000 Ohm resistors connections? Something self constructed or is there a ready solution to buy somewhere?
Quote this message in a reply
05-09-2017, 04:56 AM,
Post: #218
RE: Autohex II Technical Support & Feedback
You mean for boot mode? If so:
3 resistors, 1/4 or 1/2 watt. 1k ohms.
Accuracy is 10%, 20% is ok too.
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to MTKAutoHex for this post
05-09-2017, 05:15 AM, (This post was last modified: 05-09-2017, 05:21 AM by emerer.)
Post: #219
RE: Autohex II Technical Support & Feedback
(05-09-2017, 04:56 AM)MTKAutoHex Wrote:  You mean for boot mode? If so:
3 resistors, 1/4 or 1/2 watt. 1k ohms.
Accuracy is 10%, 20% is ok too.

Yes, but how to easy connect these 3 at the same time without soldering?
Quote this message in a reply
05-09-2017, 13:40 PM, (This post was last modified: 05-09-2017, 13:42 PM by bryosb.)
Post: #220
Autohex II Technical Support & Feedback
This is what I use

[Image: b6672db81bcba3a75f58ebe5463ac861.jpg]


Sent from my iPhone using Tapatalk
Quote this message in a reply
[+] 4 users say Thank You to bryosb for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Autohex-unlocking Fem problem tonemoz 22 1,564 17-06-2023, 22:17 PM
Last Post: jaramillo
  BMW BDC replacement with Autohex RaoulK1998 3 367 28-02-2023, 08:17 AM
Last Post: laquangksxd
  ISTA with AutoHex II head? RaoulK1998 0 219 14-02-2023, 13:01 PM
Last Post: RaoulK1998
XZBMW Bmw AutoHex Full Package Vs Bmw Explorer Full psya 30 8,788 12-05-2019, 15:01 PM
Last Post: Jumper
  BMW Explorer or AutoHex need diag06 19 9,108 29-09-2016, 16:40 PM
Last Post: MTKAutoHex

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content