Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Consult III Plus with Ford VCM II
14-08-2015, 15:58 PM,
Post: #1
|
|||
|
|||
Consult III Plus with Ford VCM II
Hi,
Could you please share exact manual and, if possible, configuration files for Consult III Plus to run it with Ford VCM II interface. I made some changes in files and registry based on forum manuals but it doesn't see ignition still, interface is recognised in some way. Thanks for any help. |
|||
14-08-2015, 16:15 PM,
Post: #2
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
Forget about
The Ignision ON its not seen if you use VCM II I use AVDI and Ignision ON it is not seen too I read that no matter what j2534 tool you use the Ignition ON its not seen I understood that only if you use Alliance VI2 Same you cannot see live data parameters. Good luck |
|||
14-08-2015, 22:19 PM,
Post: #3
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
Thanks, could you please share your configuration files and registry settings for AVDI ? I think that I am doing something worng because it does not connecting to the car. Generally, the error is in interface connection menu. It see interface , name is 12345 and when I push connect button there is an error.
|
|||
15-08-2015, 04:15 AM,
Post: #4
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
Mate
Install the passtrue drivers for AVDI The configuration file is the same and write the name your tool from registry I'm using it as a passthru so you have write there APTxxxxx ( xxxxx- your tool S/N ) Nothing special sir Good luck |
|||
18-08-2015, 17:26 PM,
Post: #5
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
I know what I was doing wrong. I was trying to connect to interface first.
But when I pick-up appropriate car and push button connect it works great ! Of course, I had ingintion error but modules was recoginsed without problem, Hope it will help someone. |
|||
19-02-2016, 09:32 AM,
Post: #6
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
men how to connect, VCM II with Nissan Consult +?
any advice |
|||
21-02-2016, 12:01 PM,
Post: #7
|
|||
|
|||
RE: Consult III Plus with Ford VCM II
(19-02-2016, 09:32 AM)flywin Wrote: men how to connect, VCM II with Nissan Consult +? Found this on another forum. I tested it once with limited succes. For ford VCMII Install the consult 3 plus Change diagnostictool.ini file in Nissan instalation folder Install your VCMII Manager and drivers. In passhru 4.04 in reg edit and rename NISSAN_VI2 To something else change name Bosch Ford-VCM-II to NISSAN_VI2 Reboot computer and test it |