Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Volvo fh16 660
14-09-2014, 20:06 PM,
(This post was last modified: 02-12-2017, 16:26 PM by Clusters.)
Post: #1
|
|||
|
|||
Volvo fh16 660
Hi,
I have a Volvo fh16 660 2007 from idle to 10,000 revs it shakes like it has a misfire but does not. I was told it may be the vibration damper (pulley) on the crank at the front, has anyone else had this experience with this? I don`t really want to change this if it is not the problem too expensive. Thanks |
|||
14-09-2014, 21:37 PM,
Post: #2
|
|||
|
|||
RE: Volvo fh16 660
(14-09-2014, 20:06 PM)ed209trucks Wrote: Hi, Hallo i wood see on the drive shaft on the bearings 4 in front and 4 in the back of the shaft take a pray bar and see for slack sorry for my bad english |
|||
16-09-2014, 19:16 PM,
Post: #3
|
|||
|
|||
RE: Volvo fh16 660
(14-09-2014, 21:37 PM)citroenc4boy Wrote:(14-09-2014, 20:06 PM)ed209trucks Wrote: Hi, no this is ok thanks |
|||
07-06-2015, 10:19 AM,
Post: #4
|
|||
|
|||
RE: Volvo fh16 660
I would suggest a diagnostic test with cylinder cut out test maybe low compression on cylinder at low idle did have similiar problem before.[img]images/smilies/rofl.gif[/img]
|
|||
17-08-2015, 09:58 AM,
Post: #5
|
|||
|
|||
RE: Volvo fh16 660
Problem solved.
it was the duel mass flywheel. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content