[Mrg0721]

Thank you for all of your helps. Unfortunately it does not work. I will buy another cable. This cable I try use DCAN for dos and windows but got error message like K-Line Echo or not connect to adapter etc. Anyways, I get back to you once I got new cable.

If you don't mind me asking, what color is your DCAN cable? From my past experiences, only the silver cables have worked for me, the other cables (blue, etc) were very limited or didn't work at all. Also, I am little ignorant on this subject because I've never used an ENET and I only have e90 & e92 (DCAN) cars but I believe some of the newer cars, F-series, etc., require an ENET cable, but maybe more knowledgeable members can chime in on this.

[beemerboy88]

Thank you for all of your helps. Unfortunately it does not work. I will buy another cable. This cable I try use DCAN for dos and windows but got error message like K-Line Echo or not connect to adapter etc. Anyways, I get back to you once I got new cable.

If you don't mind me asking, what color is your DCAN cable? From my past experiences, only the silver cables have worked for me, the other cables (blue, etc) were very limited or didn't work at all. Also, I am little ignorant on this subject because I've never used an ENET and I only have e90 & e92 (DCAN) cars but I believe some of the newer cars, F-series, etc., require an ENET cable, but maybe more knowledgeable members can chime in on this.

For diagnostics k+dcan cable works on E & F series cars.

[mattydr67]

Check your VID/PID sir
If it is 0403/0000 then it will not work
But it can be restored and use the FTDI drivers till 2.10
Then Use MPprog and reflash it with right ept file from a good D-CAN tool
I restored D-CAN tool of a very good friend of mine as this. Maybe this will help you too
Good luck

[tuanvo1982]

Thank you for all of your helps. Unfortunately it does not work. I will buy another cable. This cable I try use DCAN for dos and windows but got error message like K-Line Echo or not connect to adapter etc. Anyways, I get back to you once I got new cable.

If you don't mind me asking, what color is your DCAN cable? From my past experiences, only the silver cables have worked for me, the other cables (blue, etc) were very limited or didn't work at all. Also, I am little ignorant on this subject because I've never used an ENET and I only have e90 & e92 (DCAN) cars but I believe some of the newer cars, F-series, etc., require an ENET cable, but maybe more knowledgeable members can chime in on this.

I have a silver one and K+DCAN USB interface (INPA compatible)
I also open to check the pin 7+8 is not solder.
My car is X1 E84 2010 I think pin 7 -8 should not solder together.

---

Thank you for all of your helps. Unfortunately it does not work. I will buy another cable. This cable I try use DCAN for dos and windows but got error message like K-Line Echo or not connect to adapter etc. Anyways, I get back to you once I got new cable.

If you don't mind me asking, what color is your DCAN cable? From my past experiences, only the silver cables have worked for me, the other cables (blue, etc) were very limited or didn't work at all. Also, I am little ignorant on this subject because I've never used an ENET and I only have e90 & e92 (DCAN) cars but I believe some of the newer cars, F-series, etc., require an ENET cable, but maybe more knowledgeable members can chime in on this.

I have a silver one and K+DCAN USB interface (INPA compatible)
I also open to check the pin 7+8 is not solder.
My car is X1 E84 2010 I think pin 7 -8 should not solder together.

---

Check your VID/PID sir
If it is 0403/0000 then it will not work
But it can be restored and use the FTDI drivers till 2.10
Then Use MPprog and reflash it with right ept file from a good D-CAN tool
I restored D-CAN tool of a very good friend of mine as this. Maybe this will help you too
Good luck

I have 0403/6001 and version 2.12.6.0. Now I will try older version 2.10 and report back soon
Thanks

---

can I have the ept file please?

[tuanvo1982]

I have try eprom 0403/0000 but still the same.

[mattydr67]

I have try eprom 0403/0000 but still the same.

With Vid/Pid 0403/0000 will never work
Good luck

D-CAN.rar
File Type:
Downloaded:	57 times
Size:	608 bytes

[tuanvo1982]

I found that 0403/0000 means the pin 7 and 8 was soldered Anyway, I try flash and my computer does not recognise the usb :P. I will buy new one and see.

[mattydr67]

Not at all mate
Vid/Pid 0403/0000 means that the FT232RL in your tool its a fake one
And the ability of new ftdi drivers to ban it did the job
All you have to do is to reflash the ftdi in your tool and install a driver as 2.08.xx then disable automatic updates.
You will fine.
Soldered pin 7-8 has nothing to do with your issue.
The question is: have your tool vid/pid 0403/0000 in Device Manager?
If yes. Do you know to manage this to make it back vid/pid 0493/6001 ( using the ept file that I shared to you ) ?
Good luck

[hulahans]

Not at all mate
Vid/Pid 0403/0000 means that the FT232RL in your tool its a fake one
And the ability of new ftdi drivers to ban it did the job
All you have to do is to reflash the ftdi in your tool and install a driver as 2.08.xx then disable automatic updates.
You will fine.
Soldered pin 7-8 has nothing to do with your issue.
The question is: have your tool vid/pid 0403/0000 in Device Manager?
If yes. Do you know to manage this to make it back vid/pid 0493/6001 ( using the ept file that I shared to you ) ?
Good luck

I don t have this problem, but its very interesting.Maybe you can explain what to do exactly, if you have time for it.

[mattydr67]

Very easy to do it
Install the drivers for 0403/0000 ( insert a new line in driver .ini with this vid/pid 0403/0000 then you can instal. The drivers and tool will be recognized in the Device Manager )
Then use MProg ,
First I flashed with default ept ( vid/pid 0403/6001 ) file that you find it in MProg.
After this I flashed again using D-CAN ept file ( the one I shared above )
Now if you have this issue then do not use a higher ftdi drivers version.
I'm using 2.08.28 even my tool it hasn't this ftdi issue with newer drivers but I still use this version of ftdi drivers
If there you cannot see the vcp ( virtual com port ) and only usb serial convertor then go in the driver properties and set the VCP
Then a virtual com port will be assigned.
After this you can change it to com 9 and latency 1
Now "voila" you have your tool working again
Good luck