Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mandatory move to DiagBox 8.xx after 16.10.2015
14-09-2015, 08:01 AM,
Post: #1
|
|||
|
|||
Mandatory move to DiagBox 8.xx after 16.10.2015
This morning I operated DiagBox v7.76 with the network connected to the internet and noticed a message stating that DiagBox v7.xx will be unusable after 16 October 2015, and that I will have to install DVD 8 (DiagBox 8.xx)... Read the message on top of the "Home" and "Measurements" tabs in the first picture.
Well, to verify this news I turned DiagBox off, advanced the date on my computer to October 20th 2015 and sure enough, my previously working installation gave me the error "The communication card is incorrectly initialized. The tool must be restarted". Tried a couple of times, but to no avail.. With the date still advanced, I turned off DiagBox, disconnected the network then turned DiagBox on again, and it worked. See attached photos. The moral of the story, to avoid errors, keep your network cable/card disconnected. In fact DiagBox seem to respond faster with network disconnected. Tests were performed on: Notebook: HP Envy M6, CPU: intel i5, Ram: 8 GB, Hard Drive: 1 TB SSHD, Operating System: Windows 10 64bit running VMware Workstation 12 on which DiagBox 7.76 is installed on Windows 10 32bit / 4 GB RAM / 40 GB Drive Virtual Machine. |
|||
Reputation: +2 - carpi [+1] , Renopower [+1] | |||
21-09-2015, 10:33 AM,
Post: #2
|
|||
|
|||
RE: Mandatory move to DiagBox 8.xx after 16.10.2015
Yesterday I upgraded my Windows 7 based DiagBox v7.66 installation to 7.77 online. I did NOT receive the warning message that the DiagBox 7.xx installation will become inoperable after the 16 October 2015 and that I will have to install version 8.xx.
Initial conclusion is that this message may be relevant to the Windows 10 installations only... |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
diagbox 9.173 | sharawi | 2 | 295 |
21-04-2024, 14:31 PM Last Post: justdiag |
|
PSA Diagbox VCI Interfaces | alexturbo | 18 | 7,182 |
27-12-2023, 21:45 PM Last Post: apol |
|
DIAGBOX 2021 9.85 FULL INSTALATION | akli | 6 | 2,959 |
26-12-2023, 20:21 PM Last Post: Le-Mans |
|
DIAGBOX online | walczaklu | 10 | 8,833 |
03-12-2023, 12:57 PM Last Post: mattydr67 |
|
DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) | Simple | 33 | 35,940 |
22-11-2023, 06:16 AM Last Post: Jeppo |
|
Diagbox 9.129 activation request | dadoa4 | 4 | 2,520 |
09-11-2023, 09:59 AM Last Post: bovhec |
|
diagbox 9.150 | stasi | 5 | 2,447 |
16-09-2023, 19:41 PM Last Post: stasi |
|
DiagBox Language Change | Simple | 16 | 17,556 |
14-09-2023, 10:01 AM Last Post: żarówka |
|
Need wiring diagram ENGINE of PEUGEOT 308 2015 (DW10FC) 135 kw 179HP | roanoke | 0 | 270 |
06-08-2023, 17:09 PM Last Post: roanoke |
|
DIAGBOX help needed installing | mars2moon | 4 | 1,107 |
23-07-2023, 18:45 PM Last Post: J415UNNY |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content