VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509) |
RE: VCDS 17.8 MULTILANGUAGE FULL - zeze - 08-11-2017 Hi somebody notice that vcds stop working?? solution is put date back to 1 November and work again (or use runasdate) i am using Pt version 17.1.3 regards ze RE: VCDS 17.8 MULTILANGUAGE FULL - d4rk - 08-11-2017 Hello, Today I uploaded it to two interfaces. On the interface 908 (FW Version: 1.81, HW Version: 0x46) I uploaded via USBasp - avrdude. In interface 11.11 (FW Version: 1.92, HW Version: 0x46) I uploaded whit MProg settings ftdi_mprog_RLRQ.ept, next VAGCOM_EEWrite and finished updating in VCDS. Interfaces work, but when I tried the test I noticed one problem. When trying to change long coding in 09-Cent. Elect. on: 40000AB8A0050CF040100084110001A4436000AE524D89605CC440000040 after change: 000AB8A0050CF040100084110001A4436000AE524D89605CC44000004000 Byte 0 has been deleted and all Byte has been shifted one forward, and the end has been added 00 I tried to do it on 17.8.0 Polish version. with loader_v2 I had to set the long coding of the original interface. RE: VCDS 17.8 MULTILANGUAGE FULL - rch11 - 09-11-2017 (08-11-2017, 20:33 PM)d4rk Wrote: Hello,I had the same thing. Use 17.1.3 and it will be ok. VCDS 17.8 MULTILANGUAGE FULL - mikroel - 09-11-2017 (09-11-2017, 06:47 AM)rch11 Wrote:(08-11-2017, 20:33 PM)d4rk Wrote: Hello,I had the same thing. flash and eeprom for 17.1.3 and 17.8 are the same? Sent from my iPhone using Tapatalk RE: VCDS 17.8 MULTILANGUAGE FULL - d4rk - 09-11-2017 (09-11-2017, 11:35 AM)mikroel Wrote:(09-11-2017, 06:47 AM)rch11 Wrote:(08-11-2017, 20:33 PM)d4rk Wrote: Hello,I had the same thing. Yes RE: VCDS 17.8 MULTILANGUAGE FULL - barto39 - 09-11-2017 (08-11-2017, 17:14 PM)zen Wrote: Hi hi zen Thanks for the information, I have runasdate and it does not work, Keeping the date if it works You have 64 bit and 32 bit runasdate to work with vcds Thank you RE: VCDS 17.8 MULTILANGUAGE FULL - prp - 11-11-2017 (15-10-2017, 06:51 AM)Dadal Wrote: update: Dadal please tell me because have the same cable. You removed stc and flashed first by usb or by external programmer? RE: VCDS 17.8 MULTILANGUAGE FULL - b0gdi - 11-11-2017 Hello, I upgraded from 812.4 (Hardware Type HW 0x44 with BL ftdi) cable to the latest version and having some problems with some cars. Octavia 2 is ok, but i tried it on a 2012 audi a4 b8 and i cannot do autoscans, no access to engine, but the service due, oil reset works. I flashed the ftdi and atmega. Do I also need to upgrade the GAL16V8? If yes what tool and dump do I need to reprogram the GAL. Thanks RE: VCDS 17.8 MULTILANGUAGE FULL - dadal - 11-11-2017 (11-11-2017, 19:25 PM)prp Wrote:(15-10-2017, 06:51 AM)Dadal Wrote: update: No mate, first flashed by external programmer ( used TL866) after that you can flash it always by usb if you ever need it again to Flash ( STC chip must be still removed, plz dont solder it back ),, good luck RE: VCDS 17.8 MULTILANGUAGE FULL - XJL - 13-11-2017 ITs working ok but the 7805 so hot!!!!need cooling fan?? |