+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: MGU ID7 Android Auto BMW G30 (/showthread.php?tid=112762)
Pages:
1
2
RE: MGU ID7 Android Auto BMW G30 - DENTFLEX - 02-03-2026
(02-03-2026, 11:03 AM)lovinedi03 Wrote: I updated my i-level ID7 to the latest version 2 months ago, and AndoridAuto still hasn't appeared. Can someone give me some advice?
Check coding in ё_5у5:
Read Coding Data: Connect to your vehicle, go to ёxpёят Mode > Coding, and click Read (VCM) followed by Read Coding Data for the HU_MGU module.
Locate Parameter: Right-click the CAFD file and select Edit FDL.
Search for: 3000 HMI_SPEECH > ANDROID_AUTO_SWT
Set to Active: Change the value from nicht_aktiv to aktiv.
Save & Code: Click the Save icon, then go back and click Code FDL to apply the change.
RE: MGU ID7 Android Auto BMW G30 - lovinedi03 - 04-10-2026
The i-Level update and coding have been done; it’s been a few months since I started waiting for an update from the BMW server following all those updates. Android Auto still isn't working for me.
Any advice?
RE: MGU ID7 Android Auto BMW G30 - dasi - 06-10-2026
need to update it on server side
(02-03-2026, 13:11 PM)DENTFLEX Wrote:(02-03-2026, 11:03 AM)lovinedi03 Wrote: I updated my i-level ID7 to the latest version 2 months ago, and AndoridAuto still hasn't appeared. Can someone give me some advice?
Check coding in ё_5у5:
Read Coding Data: Connect to your vehicle, go to ёxpёят Mode > Coding, and click Read (VCM) followed by Read Coding Data for the HU_MGU module.
Locate Parameter: Right-click the CAFD file and select Edit FDL.
Search for: 3000 HMI_SPEECH > ANDROID_AUTO_SWT
Set to Active: Change the value from nicht_aktiv to aktiv.
Save & Code: Click the Save icon, then go back and click Code FDL to apply the change.
This is only in case of using f5с, if it's provisioning that doesn't matter.