BMW F10 6WA KOMBI dead after flash - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: BMW F10 6WA KOMBI dead after flash (/showthread.php?tid=38989) |
RE: BMW F10 6WA KOMBI dead after flash - EdgaBMW - 31-08-2018 Now Kombi is woring fine, but i have next problem, lane change warning gives error... RE: BMW F10 6WA KOMBI dead after flash - smercki - 14-09-2018 hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata I tried to flash but I always get errors and interruption of the process, despite trying different FAs! it's as if the original caf was not public .. " swfl_000003c1-006_023_014 " has anyone encountered the same problem? maybe you have to manipulate the SVT without starting the flash? it's as if he did not find the starting point ... RE: BMW F10 6WA KOMBI dead after flash - hojo29 - 14-09-2018 Try flashing the whole thing again. RE: BMW F10 6WA KOMBI dead after flash - rs@chip - 14-09-2018 (14-09-2018, 08:47 AM)smercki Wrote: hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata your cluster is steel shown as KOMBI in esys...try update VCM after modify fa and try again RE: BMW F10 6WA KOMBI dead after flash - smercki - 14-09-2018 (14-09-2018, 14:02 PM)rs@chip Wrote:(14-09-2018, 08:47 AM)smercki Wrote: hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata I also tried this road but without luck ... tried several times to update but after a few minutes of error without even leaving, I am aware of ideas RE: BMW F10 6WA KOMBI dead after flash - hojo29 - 14-09-2018 In which F series should this instrument cluster be installed? BMW F10 and new instrument cluster from F16? RE: BMW F10 6WA KOMBI dead after flash - smercki - 15-09-2018 (14-09-2018, 15:10 PM)hojo29 Wrote: In which F series should this instrument cluster be installed? yes! I tried to install even on F25 but without success, always the same errors RE: BMW F10 6WA KOMBI dead after flash - hojo29 - 15-09-2018 KIS error comes because the instrument cluster is not from F10. If so, then the FA needs to be adjusted and re-flashed. So that it recognizes ESYS correctly in the F10. RE: BMW F10 6WA KOMBI dead after flash - smercki - 17-09-2018 (15-09-2018, 13:48 PM)hojo29 Wrote: KIS error comes because the instrument cluster is not from F10. and how can I solve? RE: BMW F10 6WA KOMBI dead after flash - artek_was - 17-09-2018 Have you changed vin manually, or reset ? You have wrong eprom, not flash. |