+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: DiagBox 7.76 (/showthread.php?tid=9779)
RE: DiagBox 7.76 - maxime47 - 17-09-2015
Hello !
what ?
"id0479-M-NOT ..."
RE: DiagBox 7.76 - vagvag - 17-09-2015
(17-09-2015, 08:10 AM)maxime47 Wrote: Hello !Bad and broken update m8..........
what ?
"id0479-M-NOT ..."
Here what i mean.......
Regarts........
![[Image: 2l3r07.png]](http://i59.tinypic.com/2l3r07.png)
RE: DiagBox 7.76 - mishja - 18-09-2015
Lexia Softwae Version 500.68, what this means?
how i to find witch software i had?
RE: DiagBox 7.76 - Simple - 18-09-2015
@mishja,
The list of versions shows that if you install DiagBox version 7.66,
When you operate DiagBox, choose your car, after you insert the rpo, you get two options, press on Lexia, when it start, choose Configure your diagnostic tool, General configuration, Tool configuration, press enter ... you will see the versions...
By the way, I have updated Windows 10 to 10532.0.th2. then to 10547. It is still working... Notice the watermark in the right hand bottom corer.
I also chanced upgrading the system and got the message in the second picture.
RE: DiagBox 7.76 - mishja - 19-09-2015
Thanks friend, i will do that
RE: DiagBox 7.76 - fantomel - 20-09-2015
Maybe you can share some light regarding 7.76 version because on official website, there is no such number on release news at all as you can see from picture attached.
And since vagvag was so nice to post a print screen i presume that 7.77 is in fact 8.13.
Update 8.13, available from 26/08/2015, includes modifications, in particular :
- Taking into account of the DAP 2360 WIFI terminal specific to Japan
- Addition of 6 sub-categories to the vehicle assistance request in the EmailDiag application
RE: DiagBox 7.76 - Simple - 20-09-2015
I have updated my DiagBox v7.76 to v7.77 on Windows 10 x86 Build 10547 on VMware desktop 12.. The update was performed on the Mairesox patched release... I am surprised that it has worked, and will connect to the car sometime (hopefully soon) to check if it is actually working..
@fantomel,
If you run the update service (the down arrow or F10) you will get a list of all updates available and you will see it is there. This is how I updated to 7.77, from the official site with my patched version by Maitresox.
@vagvag,
Can you confirm the Lexia version to be 500.71 as it is showing on my setup!!
Thanks, Simple.
RE: DiagBox 7.76 - fantomel - 20-09-2015
What about problem with manual coding on cars like 208 that it's not working? Seen the discussion on french forum.
RE: DiagBox 7.76 - Simple - 20-09-2015
I have seen that as well, and if you check again, you will notice that the only confirmation is relating to DiagBox v7.65, it was known that 7.63, 7.64 and 7.65 don't do telecoding !!??. My car is Citroen C8 and I have no access to a 208, I cannot confirm, but it seems fine here.
In any case, it was confirmed that the latest fully working version (with all PSA cars) is DiagBox v7.62.
RE: DiagBox 7.76 - regner - 23-09-2015
Thank you, for the "Simple" answer