CarTechnoloGY
VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

RE: VCDS 17.8.1 MULTILANGUAGE FULL - belkor - 23-03-2018

(23-03-2018, 06:20 AM)barto39 Wrote:  
(16-03-2018, 20:00 PM)ZIPPO4594 Wrote:  Ok, you can use 17 and 18 vcds version, but you must flash with usbasp programmer (atmega, eeprom and maybe ftdi)

Hello ZIPPO4594
A question if we use flash with usbasp for atmega, eeprom, the ftdi with which program are used to flash the FTDI ?????(Some tutorial how to flash the FTDI????)
Thanchs
PROGISP is the software you are to use
have a look hereunder

RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 23-03-2018

To flash FTDI, no need usbasp.
Just apply 12v to Vin of 7805 and connect usb on your pc.
Run mprog and flash ftdi wink
VcdsLoader is a package. All of necessary tools are inclued in this package (to flash atmega, eeprom and ftdi)

RE: VCDS 17.8.1 MULTILANGUAGE FULL - alibabavl64 - 24-03-2018

Just for correct info: To flash FTDI NO NEED 12 V for 99% from \/CDS cables. Only connect USB cable to PC and use M-Prog, FT-Prog...

RE: VCDS 17.8.1 MULTILANGUAGE FULL - barto39 - 25-03-2018

Thanks guys, my question was, how do we use the M-PROG program?
to flash FTDI
Thank you

RE: VCDS 17.8.1 MULTILANGUAGE FULL - vajkooo - 26-03-2018

Hi guys,
Could somebody explain me in which situation should I programm the FTDI chip, please?

RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 27-03-2018

when you have driver problem, you must reprogram FTDI.
some chinese clone uses FA30 id, but it is a chinese invention. Rosstech uses FA20, FA24 id (depends of FTDI Version RQ, RL...)

RE: VCDS 17.8.1 MULTILANGUAGE FULL - Deathmachine - 05-04-2018

Just want to Proper Thank Dtech and Fantomel. I blew up my cable, read the posts and d'ld the proper files with little trouble. Regardless of all the people who have complained and failed to read I want to thank you for your effort and remind you some of us read a lot and post very little but appreciate your hard work.

Deathmachine

RE: VCDS 17.8.1 MULTILANGUAGE FULL - matik185 - 06-04-2018

What pins should I use ?

RE: VCDS 17.8.1 MULTILANGUAGE FULL - matik185 - 07-04-2018

Hi mates
Someone can help me ?
Attached photos.
Can I do something with it ?
Or i can throw it out..
Thanks

RE: VCDS 17.8.1 MULTILANGUAGE FULL - darek_naprawa - 08-04-2018

(07-04-2018, 21:09 PM)matik185 Wrote:  Hi mates
Someone can help me ?
Attached photos.
Can I do something with it ?
Or i can throw it out..
Thanks
You can program.