CarTechnoloGY
MY VCDS COLLECTION - ALL YOU NEED I HOPE - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: MY VCDS COLLECTION - ALL YOU NEED I HOPE (/showthread.php?tid=6932)

Pages: 1 2 3 4 5 6 7 8

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - sebasapri - 23-03-2016

(17-03-2016, 21:04 PM)fantomel Wrote:  That interface is ..... no comment. i would not bother to upgrade that one honest when for 15$ you can get a really really good hardware, i may say the best in clones, the ones that are HERE, HERE and HERE for examples smile

Compare that with what you have and then tell me if you would like to bother with yours smile

hahhaha i understand my vagcom is piece of shi..........tttttt ok ! bad luck for this time ever work since first day headbang WTF
thanks mate
regard
Sebastian

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - Tand - 16-04-2016

As always great work

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - rojhat - 20-04-2016

Hi fantomel thank you for your good job smile

Envoyé de mon SM-A510F en utilisant Tapatalk

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - macNB - 27-04-2016

(14-05-2015, 06:34 AM)fantomel Wrote:  Share so that others may learn,evolve and share some more. Like this we all evolve.

[Image: t9a0xi.jpg]

Share so that others may learn,evolve and share some more. Like this we all evolve.

Hi fantomel,
thanks for the uploads.
I don't see the MEGA download link.

The only link that works gives a zip folder called "COLLECTION12.12.0.zip"
It contains the following files:
  1. VCDS-Release-11.11.5-Installer English 512bits.exe
  2. VCDS-Release-11.11.5-Installer Romanian 512bits.exe
  3. VCDS-Release-12.12.0-Installer English 512bits.exe
  4. VCDS-Release-12.12.0-Installer Romanian 512bits.exe
  5. VCDSFT232BL.ept
  6. eeprom.hex
  7. flash_192.hex
  8. ftdi232rl.ept
  9. fuse bits after upa 320 bits.jpg
  10. fuse old and new bootloader.rtf
  11. lock bits upa 320 bits.JPG
  12. lock bits upa 512 bits.JPG
  13. security bits 320 bits.JPG
  14. security bits upa 512.JPG
  15. vers 6 11.11.5-12.12.0_eeprom 512 rl.hex

I am looking for help to repair my VAG 11.11.0 tool (with ATMEGA162, GAL16V8B, 93C56WP, FT232BL, MCP2515, TJA1050).

Will the collection I downloaded help me do that ?
If yes, which files do I need ?

Thanks

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - macNB - 01-05-2016

******* VIRUS ALERT *******

i could not install "VCDS-Release-11.11.5-Installer English 512bits.exe" as I kept getting irsetup sharing violation. I turned off AVAST Virus protection temporarily (and while NOT connect to the internet).
The install went fine expect at the last minute, Avast alerts that VCDS.EXE has win32:Malware Gen.

Its the same for "VCDS-Release-12.12.0-Installer English 512bits.exe".

Tried to do the same on another CLEAN pc, got the same problem -- the installer is hiding a Malware.

Both running Win XP.

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - mattydr67 - 01-05-2016

Its a false alert
Before installing the vcds software please disabke tge Antivirus. Put the C:\Ross-Tech folder in Exception of Antivirus
Then install the VCDS softwsre
Reboot and then enable your Antivirus
Enjoy
Good luck

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - macNB - 01-05-2016

Thanks Matty.
Will try that when I get home.

BTW, I have soldered the 4 wires to the Atmeg162 and built a parallel port adapter for PonyProb2000 to flash the ATmeg162.

But before I do, I wanted to read the contents (Flash and the EEPROM).
But every time I read the device, I get the same dump which does not look right.
See pic:
[Image: image.gif]

It looks corrupted.
Is there something wrong with my wiring or does the ATmeg162 not allow a read ?

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - mattydr67 - 02-05-2016

Atmega162 its protected mate that's why your dump is corrupted.
Do you thing tgat chinese or ross-tech or anyone let the Atmega162 unprotected to be read it with an AVR programmer?
So you cannot backup your tool ( at least in this way )
Good luck

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - macNB - 02-05-2016

OK Thanks Marty I got it now.

I thought that might be the case but was not sure if my wiring was at fault.

So it seems it's OK to re-flash it (I gonna use PonyProg).

What's not clear to me is the order of re-flashing.

Do I do it in this order ? :
1. Erase the device
2. program the Flash
3. program the eprom
4. write the fuse, lock and security bits

RE: MY VCDS COLLECTION - ALL YOU NEED I HOPE - mattydr67 - 02-05-2016

That's ok
Good luck