VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509) |
RE: VCDS 17.8 MULTILANGUAGE FULL - rch11 - 12-08-2017 (12-08-2017, 06:15 AM)Szokimoki Wrote:Insert a picture of your interface.(09-08-2017, 20:45 PM)DTech Wrote: Try on another system to update or if fails then classic method by programmerI tried with a TL866A programmer. RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 12-08-2017 (12-08-2017, 08:37 AM)rch11 Wrote: Insert a picture of your interface.[attachment=52953] RE: VCDS 17.8 MULTILANGUAGE FULL - rch11 - 12-08-2017 (12-08-2017, 13:50 PM)Szokimoki Wrote:Here connect the programmer and connect 12V to the OBD(12-08-2017, 08:37 AM)rch11 Wrote: Insert a picture of your interface. RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 12-08-2017 (12-08-2017, 17:13 PM)rch11 Wrote: Here connect the programmer and connect 12V to the OBDThx! I know VCC and GND but wich pad is: -reset -mosi -miso -sck RE: VCDS 17.8 MULTILANGUAGE FULL - GreatVortex - 13-08-2017 Take a multimeter and test which pad where goes on the atmega pins. RE: VCDS 17.8 MULTILANGUAGE FULL - fantomel - 13-08-2017 And maybe this will help you narrow it down more quickly RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 13-08-2017 (13-08-2017, 08:27 AM)fantomel Wrote: And maybe this will help you narrow it down more quicklyI tried with TL866 but failed! No chip ID. ---> error no connection or something else ---> error Now when I trying to test with VCDS then Interface found...bla-bla-bla.... version unknown and update not possible. Still. In the device manager: USB - Ross-Tech direct USB Interface I ordered a new one from Ali with good parts. RE: VCDS 17.8 MULTILANGUAGE FULL - EagleOne - 14-08-2017 Hello, What connection for this VCDS board Version? Thanks RE: VCDS 17.8 MULTILANGUAGE FULL - Qwantor - 14-08-2017 There is used NEC. There is no available dumps for this kind of VCDS board. RE: VCDS 17.8 MULTILANGUAGE FULL - DTech - 14-08-2017 Update 14.08.2017 Loader V2 compatible with RL-RQ-BL-BM interfaces. Reworked tool for update interface by USB - keeps count of type of hw in eeprom. New eeprom dumps for each version of hardware Included in pack Progisp v1.72 and also Mprog 3.5 with templates Remade projects with new dumps for Progisp and TL866 All versions released until today on any language work even NEZ one See 1st page |