+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)
RE: VCDS 17.8.1 MULTILANGUAGE FULL - alibabavl64 - 01-09-2019
A bad one. No atmega.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - stergis - 02-09-2019
i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?
RE: VCDS 17.8.1 MULTILANGUAGE FULL - Michael1 - 02-09-2019
(02-09-2019, 20:19 PM)stergis Wrote: i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?Hi
Try check interface with MPROG, have it in first post here, Loadre V2. and do you have OP Com instaled at your computer?
RE: VCDS 17.8.1 MULTILANGUAGE FULL - stergis - 05-09-2019
(02-09-2019, 22:15 PM)Michael1 Wrote:(02-09-2019, 20:19 PM)stergis Wrote: i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?Hi
Try check interface with MPROG, have it in first post here, Loadre V2. and do you have OP Com instaled at your computer?
mprog doesnt fix it .
no i dont have insalled the op com , i cant find why the cable says op com v2
RE: VCDS 17.8.1 MULTILANGUAGE FULL - Michael1 - 05-09-2019
(05-09-2019, 12:01 PM)stergis Wrote:Hi(02-09-2019, 22:15 PM)Michael1 Wrote:(02-09-2019, 20:19 PM)stergis Wrote: i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?Hi
Try check interface with MPROG, have it in first post here, Loadre V2. and do you have OP Com instaled at your computer?
mprog doesnt fix it .
no i dont have insalled the op com , i cant find why the cable says op com v2
Please conect interface and with Mprog, Read and Read and Read and Parse device (like on this picture), upload screenshot here. on this picture was read OP Com, and please upload picture of our interface.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - darek_naprawa - 06-09-2019
(02-09-2019, 20:19 PM)stergis Wrote: i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?Maybe this opcom not vcds.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - Mario68 - 06-09-2019
(02-09-2019, 20:19 PM)stergis Wrote: i have a vcds clone from china and when i connect it to my pc device manager see it as op com v2 , so the vcds cant see the cable and also i cant install the correct drivers.can anyone help me?Hi. Use MPROG and change / program EPT from vcds.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - mattdj - 15-09-2019
Loader 9.2 work fine with VCDS ENG 19.6.1 and VCDS ITT 19.6.1
RE: VCDS 17.8.1 MULTILANGUAGE FULL - MrThang - 26-09-2019
Hi, everybody!
I ordered a VCDS HEX-CAN cable from China, at first they promised me that they would provide English software, but then they provided Chinese software 19.6.1. I have manually searched the English version 19.6.1 with the VCDS loader 9.2. However, I cannot use the Basic setting function for the engine and the gearbox. What is my problem here? And I also can't check for software updates. Can you guys explain to me about this problem? I've uploaded VCDS 19.6.1 both of English and Chinese version. Who can help me?
Thanks
RE: VCDS 17.8.1 MULTILANGUAGE FULL - mattdj - 27-09-2019
(26-09-2019, 10:23 AM)MrThang Wrote: Hi, everybody!You have insert login code?
I ordered a VCDS HEX-CAN cable from China, at first they promised me that they would provide English software, but then they provided Chinese software 19.6.1. I have manually searched the English version 19.6.1 with the VCDS loader 9.2. However, I cannot use the Basic setting function for the engine and the gearbox. What is my problem here? And I also can't check for software updates. Can you guys explain to me about this problem? I've uploaded VCDS 19.6.1 both of English and Chinese version. Who can help me?
Thanks