Question (ISTA/P)errors - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Question (ISTA/P)errors (/showthread.php?tid=10101) Pages:
1
2
|
Question (ISTA/P)errors - Wesk18 - 20-09-2015 Hello, Does someone know how to change the ilevel with tool32, i have an a weird version (E89x-05-09-530), (E89X-21-09-432) it won't let me run ista/p. thanks RE: Question (ISTA/P)errors - Sabreace - 20-09-2015 First Picture : Vin from CAS and FRM missmatch because they are different Second Picture I think your I-Stufe is not write to car Regards Sab RE: Question (ISTA/P)errors - leo04 - 20-09-2015 You need to change your I-Stufe in CAS RE: Question (ISTA/P)errors - Wesk18 - 20-09-2015 (20-09-2015, 17:30 PM)Sabreace Wrote: First Picture : can this missmatch be fix with winkfp? if so how? (20-09-2015, 17:44 PM)leo04 Wrote: You need to change your I-Stufe in CAS How do i change my i-level in cas? do i use winkfp? RE: Question (ISTA/P)errors - KEEEN - 21-09-2015 You need check vin in FRM with tool32 and change if necessary. RE: Question (ISTA/P)errors - Wesk18 - 21-09-2015 (21-09-2015, 05:29 AM)KEEEN Wrote: You need check vin in FRM with tool32 and change if necessary.so open frm.prg then double click on which command? RE: Question (ISTA/P)errors - KEEEN - 22-09-2015 Choose correct FRM in your case and then c_fg_lesen for FRM and CAS. To change vin : C_fg_shreiben and C_fg_auftrag but you can not change vin in CAS RE: Question (ISTA/P)errors - Wesk18 - 22-09-2015 (22-09-2015, 10:12 AM)KEEEN Wrote: Choose correct FRM in your case and then c_fg_lesen for FRM and CAS. thanks, I think I got it fixed but will check again today, I used winfkp to update FRM with my vin then ran ista/p and it didn't gave me the vin error just the I-level error. Are you familiar with winfkp and doing updates on the modules, if so after updating certain modules like for example klima, does running ncsexpert and executing "SG-CODIEREN" to set to factory settings does this means re-encoding/calibrating? I wasn't sure if I was doing it correctly but after updating Klima my ac stopped working then doing "SG-CODIEREN" fixed it. RE: Question (ISTA/P)errors - Wesk18 - 01-10-2015 (20-09-2015, 17:30 PM)Sabreace Wrote: First Picture : Do you know how to write correct i-stufe using toolset32? RE: Question (ISTA/P)errors - ruben_17non - 02-10-2015 Open E89.prg and check istuffe lesen and write |