+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69)
+---- Thread: I need the calibration files of new cars ford (/showthread.php?tid=10288)
Pages:
1
2
I need the calibration files of new cars ford - kugawai - 30-09-2015
Hello i need calibration files because i cant download from Ford. Thanks very much
RE: I need the calibration files of new cars ford - ryanb - 30-09-2015
What are you working on? do you know what file name you need?
RE: I need the calibration files of new cars ford - kugawai - 30-09-2015
I need for all module ir Ford kuga mk2 (2012-2015), pcm, rcm, etc. Thanks.
RE: I need the calibration files of new cars ford - sev611 - 29-11-2015
If tou have a vin i couldt look it up in fdrs and get the calibration numbers it is not all that are downloadable
i have some calibration files (ca 3.5gb) it is not all just what we got downloaded at work because it looks in local database first and then ask to download it from ford if its not there
in generaly all ford cars after 01-2015 is online reprogramming with fdrs (in a java pop up program)
and not in ids
rgds sev
RE: I need the calibration files of new cars ford - kugawai - 13-12-2015
Yes but my vcm2 when is going to conect, don't load anything
RE: I need the calibration files of new cars ford - Krystianen - 26-01-2016
Hi
i also need some calibration files for a few cars.
i have vin car and software ver.
I need this to upgrade ex. FF3 1.0Eb 100PS to 125PS.
Any body can help me?
pls PM.
RE: I need the calibration files of new cars ford - sev611 - 27-01-2016
(26-01-2016, 18:42 PM)Krystianen Wrote: Hi
i also need some calibration files for a few cars.
i have vin car and software ver.
I need this to upgrade ex. FF3 1.0Eb 100PS to 125PS.
Any body can help me?
pls PM.
I think that it is not possible to do because i have tried to do it by telling the car that pcm was programmed wrong and giving it te 125 ps module number and it told that there was missing two files before it could do it ihave searched the files every where and ben taking to our help line telling him that the programing failed and now i had a car that was unable to start he told me to try to make a manuel upload of the car and try again
i gave up and told him that i had cloned the pcm with a nother car
i know that there are a lot of 125 ps programs one off them is :f1b1-14c204-akb
another is c1b1-14c204-ek c1b1-14c204-eh and this is just a few of them i have seen i think that it is about the equipment of the car wich desides what program it uses
RGDS SEV
RE: I need the calibration files of new cars ford - Krystianen - 28-01-2016
I'm 100% sure that programming 100PS with 125PS file is possible. What interface are are you trying to program it? IDS? I dont know how to do it by ids I'm using russian Ucds. There i need to select 2 files second bootloader and calibration files .vbf. Sbl file i already have.
The way to get right calibration file is access to ETIS Online, but i dont have( but i want too)...
RE: I need the calibration files of new cars ford - Focus2013 - 28-01-2016
Be careful about installing the original 125 HP software on a 1.0 ECOboost 100 HP!
The 125 HP version of this engine is technically different from the 100 HP version. The 125 HP version has a different turbo and cilinder head.
Because the 100 HP and 125 HP version both have the same PCM it will be no problem to install the 125 HP software on a 100 HP PCM. However you have to know exactly which software version you need.
RE: I need the calibration files of new cars ford - n0ble - 29-01-2016
You are wrong. The only car that has different parts is the version that's 80hp stock. 100, 125 and 140hp are identical.
Sent from my E6853 using Tapatalk