Mercedes flap remove "Inlet port shut off motor" - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Mercedes flap remove "Inlet port shut off motor" (/showthread.php?tid=10717) |
Mercedes flap remove "Inlet port shut off motor" - simo84 - 19-10-2015 Please help me i need good solution to remove dtc 2513 "Inlet port shut off motor" fault code from B CLASS edc16 cdi Thanks in advance RE: Mercedes flap remove "Inlet port shut off motor" - mike_service - 19-10-2015 Hi here you have dtc off file,but i am sure your car will be also in limp mode RE: Mercedes flap remove "Inlet port shut off motor" - teerak2uk - 31-10-2015 Yes normally in limp mode to as I've just done an ML which you can just wire a resistor across the 12v and signal wire on the motor plug but I chose to map it out along with egr knowing that would be the next problem RE: Mercedes flap remove "Inlet port shut off motor" - mike_service - 31-10-2015 I can disable flaps also egr from the file....but the user have ask onlu for dtc off !!! Regards Mike |