I\O Terminal - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: I\O Terminal (/showthread.php?tid=10889) |
I\O Terminal - Dash_Burner - 26-10-2015 Hi mates. I (still) need a tool for corecting milleage in ECU for opel and fiat cars and models after 2004-5. I find i\o terminal interesting so, does anybody use this tool ? Is it worth to buy it ? Please answer only if you are user of this tool. RE: I\O Terminal - tronico - 26-10-2015 I use I/O terminal Marelli plugin. It's a great tool to R/W these ECUs. Problem could be in your case that the readed mileage don't match in most case. So You need modify the mil value with another software or manually. And many Fiat (and I think some of the newest Opel too) equipped with Bosch ECU which aren't covered by I/O term. RE: I\O Terminal - Dash_Burner - 27-10-2015 (26-10-2015, 19:51 PM)tronico Wrote: I use I/O terminal Marelli plugin. It's a great tool to R/W these ECUs. Problem could be in your case that the readed mileage don't match in most case. So You need modify the mil value with another software or manually. And many Fiat (and I think some of the newest Opel too) equipped with Bosch ECU which aren't covered by I/O term. Thanks for answer. Which tool is compatible with bosch ECUs ? RE: I\O Terminal - ricards99 - 27-10-2015 Ioterminal is a great tool, it had siemens module, magnetti marelli module, bosch module and some other things if you would like to see what it can do you can visite the official site ioterminal.com i have siemens module and never have problem RE: I\O Terminal - tronico - 27-10-2015 [/quote] Thanks for answer. Which tool is compatible with bosch ECUs ? [/quote] It's not too easy. Maybe AVDI can handle the most of it (EDC16 and some petrol type too). But the newest ones (like ME17xx, MED17xx and EDC17xx) not. And I think these can't do through OBD with any device. RE: I\O Terminal - Dash_Burner - 08-11-2015 (26-10-2015, 19:51 PM)tronico Wrote: I use I/O terminal Marelli plugin. It's a great tool to R/W these ECUs. Problem could be in your case that the readed mileage don't match in most case. So You need modify the mil value with another software or manually. And many Fiat (and I think some of the newest Opel too) equipped with Bosch ECU which aren't covered by I/O term. Where from did you buy IO terminal. I am searching for a good shop with good prices to buy RE: I\O Terminal - ricards99 - 08-11-2015 May be better from devlopper ioterminal.com RE: I\O Terminal - koyot - 02-12-2017 Ioterminal vag dsg NOT WORK tested in 8-9 units dsg dq 200 dq250 only one units dq250 conected and read eeprom and flash ) flash read 375kb only |