+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Clio airbag reprogramming (/showthread.php?tid=1092)
Clio airbag reprogramming - Scousebil - 18-12-2013
Ok so i have the MOT in about ten days and have the airbag service light on. I cut out the plugs and soldered the wires but it didn't help so tried to bypass with resistors but again had no effect. Clip showing DF183 and DF077 (thorax airbag and seatbelt tensioner) just wondering if anyone knows how to take them off the equipment list with a cloned clip? Thanks
RE: Clio airbag reprogramming - asto - 18-12-2013
Yes can configure with clip clone,disconected plugs and configure without thorax airbag and seatbelt tensioner and clear dtc
RE: Clio airbag reprogramming - Scousebil - 18-12-2013
How do i do it!? thanks
RE: Clio airbag reprogramming - asto - 18-12-2013
Check airbag module and in this module have reprogramming function,and read configuration and after can configure airbags only off this airbag what no need
RE: Clio airbag reprogramming - Scousebil - 19-12-2013
Sorted that with Clip - took them out but it flagged up another code along with the first two. I cut the two resistors out i'd previously soldered in and the lights disappeared off the dash. Cleared the memory and I'm showing no faults now. I think there must have been a break in some of the wires somewhere other than around or in the plugs. Thanks for the help asto!!
RE: Clio airbag reprogramming - krimo - 15-01-2014
(18-12-2013, 19:05 PM)Scousebil Wrote: Ok so i have the MOT in about ten days and have the airbag service light on. I cut out the plugs and soldered the wires but it didn't help so tried to bypass with resistors but again had no effect. Clip showing DF183 and DF077 (thorax airbag and seatbelt tensioner) just wondering if anyone knows how to take them off the equipment list with a cloned clip? Thankshi
you should soulder the wires 2.5 om resistance
regards