Tricore - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Tricore (/showthread.php?tid=10973) |
Tricore - sayf - 30-10-2015 Hi to read tricore in this ecu what mean BRKOUT?? BRKIN? PORS? TRST? what programmer have this ports to read this tricore ? RE: Tricore - aflou - 30-10-2015 Hello cmd ktag or fgtech RE: Tricore - andbar2 - 31-10-2015 Take picture of label. But I think the best will be galletto4 in boot mode. RE: Tricore - sayf - 31-10-2015 (30-10-2015, 20:38 PM)aflou Wrote: Hello Need connection info to read Can noy (31-10-2015, 01:18 AM)andbar2 Wrote: Take picture of label. But I think the best will be galletto4 in boot mode. Need connection info to read RE: Tricore - zmann - 01-11-2015 Galletto4 Tricore boot mode works via CAN. Might be a problem that on this ECU, CAN is implemented or where to find the two pins. RE: Tricore - sayf - 01-11-2015 (01-11-2015, 05:51 AM)zmann Wrote: Galletto4 Tricore boot mode works via CAN. Might be a problem that on this ECU, CAN is implemented or where to find the two pins. I have this. Connection but need boot bow to boot ? RE: Tricore - zmann - 01-11-2015 Those ten pad markings are for Freescale BDM only I think. Look at the FGT4 Tricore manual, CAN is used. Can you find the two CAN pins on the ECU? Boot pin no problem, I can tell. RE: Tricore - sayf - 01-11-2015 (01-11-2015, 13:15 PM)zmann Wrote: Those ten pad markings are for Freescale BDM only I think. Look at the FGT4 Tricore manual, CAN is used. Can you find the two CAN pins on the ECU? Boot pin no problem, I can tell. RE: Tricore - sayf - 02-11-2015 No one have info about this ecu RE: Tricore - zmann - 02-11-2015 Your boot pin ...... |