Solved ✔ ABS MK60EC1 long coding - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Solved ✔ ABS MK60EC1 long coding (/showthread.php?tid=110247)

ABS MK60EC1 long coding - sezzy - 12-09-2025 Hi everyone, I replaced the ABS/ESP unit in my 2009 VW Golf Plus (VIN: WVWZZZ1KZ9W090949). Old unit: 1K0 907 379 AE (ESP MK60EC1 H35 0120) New unit: 1K0 907 379 AJ (ESP MK60EC1 H30 0107) Long coding was successfully generated and accepted. The system works after doing all basic settings (steering angle sensor, brake pressure, lateral acceleration). Problem: I am stuck with one remaining DTC: 00150 – Plausibility Brake Booster System I tried to disable the Brake Booster Pressure Sensor (G483) via Adaptation Channel 10: Security access is accepted,but the value does not change (sensor stays enabled). Current long coding (from CarProgOnline): 243B400D09220003240B02E890220041300000  My question: Which Byte/Bit in the long coding for MK60EC1 (AJ unit) disables the Brake Booster Pressure Sensor (G483)? Any help or coding example for Golf Plus,  1.4tsi CAXA engine, DSG, no TPMS, with PDC would be greatly appreciated. Thanks in advance! RE: ABS MK60EC1 long coding - sezzy - 12-09-2025 Update I finally managed to fїж the problem. The correct long coding that works on 243B400D11220003240B02E888220040B10000