+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: 2015 Audi A8L Adaptive Cruise Control delete (/showthread.php?tid=113205)
2015 Audi A8L Adaptive Cruise Control delete - koziol - 05-12-2025
is it posible to succesfuly delete Adaptive Cruise Control ?
there is no comunication at all with module
8B-Adaptive Cruise 2 -- Status: Cannot be reached 0100
13-Auto Dist. Reg -- Status: Cannot be reached 0100
costumer wants to get rid of warning on dash .
RE: 2015 Audi A8L Adaptive Cruise Control delete - koziol - 05-12-2025
no body can help or its impossible to do it?
RE: 2015 Audi A8L Adaptive Cruise Control delete - wawan.ru - 05-12-2025
(05-12-2025, 12:47 PM)koziol Wrote: no body can help or its impossible to do it?
As far as I know, you can disable ACC and code normal GRA.
RE: 2015 Audi A8L Adaptive Cruise Control delete - koziol - 05-12-2025
can someone help with that over tv
RE: 2015 Audi A8L Adaptive Cruise Control delete - spooky75 - 07-12-2025
You can try to:
1. code it out on gateway (19) and remove Auto Dist. Reg (13) and Adaptive Cruise 2 (8B) from list
2. on engine (01) change to CCS (standard cruise control)
Change Byte5, from "6E" to "2E"
3. on instrument cluster (17)
Change Byte4, from "BF" to "BB"
4. Clean all errors, cycle IgnOFF/IgnON
Test and provide back info.
RE: 2015 Audi A8L Adaptive Cruise Control delete - koziol - 08-12-2025
Problem solved
I deleted acc from
engine module
Gateway module
instruments cluster
steering wheel module
On-board Camera
їшяgё Processing
light was still on than I disconect battery for more than 2 hr
after that no more light on dash
RE: 2015 Audi A8L Adaptive Cruise Control delete - spooky75 - 08-12-2025
(Today, 00:49 AM)koziol Wrote: Problem solved
I deleted acc from
engine module
Gateway module
instruments cluster
steering wheel module
On-board Camera
їшяgё Processing
light was still on than I disconect battery for more than 2 hr
after that no more light on dash
Nice at it's fїжed
Missed їшяgё processing, newer worked with car which have it.
Instead to disconnect battery and wait 2hours, you could also do "bus rest" by
1. Clean errors, cycle IgnOFF and wait 30sec
2. IgnON and clean errors again
3. cycle IgnOFF/IgnON one more time and then clean errors again.