+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: NBT EVO bricked (/showthread.php?tid=116031)
NBT EVO bricked - szefuncio512 - 23-02-2026
Hi
I need some help recovering a bricked NBT Evo ID4 on my bench setup (ZGW + їсош).
After a failed flash, my EVO is full of UNKN_FFFFFFFF files. If I set I-Step shipment to 16-11-500 (matching the production date on EVO sticker), everything stays blue and I can't start the flash. If I set I-Step to 17-07-503, the files turn red and I can calculate the TAL. But when I start the flash, it switches to UDS and just hangs there forever (I've waited up to 16h with no progress). If I try to force HTTP or KWP2000, it immediately throws a parallel programming error and stops.
SVT-Lesen vor TAL-Abarbeitung gestartet.
ueberpruefung Mirror-Protokoll gestartet
Mirror-Protokoll: kein Token erforderlich.
SVT-Reference wird gelesen
ueberpruefung Programmierschutz "BASIC" gestartet
Fuer den Flashvorgang ist kein Programmierschutz Token "BASIC" erforderlich
ueberpruefung Programmierschutz "PLUS" gestartet
Fuer den Flashvorgang ist kein Programmierschutz Token "PLUS" erforderlich
TAL-Abarbeitung gestartet.
VCM Update: Automatische VCM-Aktualisierung ist deaktiviert. VCM wird nicht aktualisiert.
<httpServerActivation: true>
<isDeactivateHttp: false>
<ExecutionID=2026/02/23-17:53:33.355>
<[] prepareTALExecution started [PROGRESS]>
<MCDDiag5ёяvїcё<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, 5ёяvїcё=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, 5ёяvїcё=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAG5ёяvїcё]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>
<MCDDiag5ёяvїcё<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, 5ёяvїcё=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, 5ёяvїcё=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_NBT2_63_ETHERNET> [DIAG5ёяvїcё]>
<[] prepareVehicleForFlash finished [PROGRESS]>
<MCDDiag5ёяvїcё<id=454649, job=com.bmw.psdz.jobs.uds.vcm.MCD3_UploadFromVCM, 5ёяvїcё=RC_RLE_VCM - RoutineControl RequestListEntry, description=error: negative response : requestOutOfRange, link=VCM_ETHERNET> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, 5ёяvїcё=DSC - dїдgиo5тїcSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, 5ёяvїcё=DSC - dїдgиo5тїcSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, 5ёяvїcё=DSC - dїдgиo5тїcSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAG5ёяvїcё]>
<MCDDiag5ёяvїcё<id=242900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, 5ёяvїcё=RC_SDB - RoutineControl SetDefaultBus, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAG5ёяvїcё]>
<[] Activate programming mode was not successful for: [ECUId:HU_NBT2_0x63] [THROWABLE]>
<[] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [THROWABLE]>
<[] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [THROWABLE]>
RE: NBT EVO bricked - Siki78 - 23-02-2026
Turn off parallel programming
RE: NBT EVO bricked - artis_2 - 23-02-2026
Is this stock ё_5у5 or you are using lдциcнёя?
RE: NBT EVO bricked - szefuncio512 - 23-02-2026
it is turned off
ё5у5 ultra lдциcнёя
ё5у5 version 24.06.01
RE: NBT EVO bricked - Siki78 - 23-02-2026
Use ё5у5 alone without lдциcнёя and try with zeitkriterium=0718 typeschlussel=8A11 and 18-07-500
RE: NBT EVO bricked - bmchicago - 23-02-2026
what kind of interface are you using? direct connection or using a router?
RE: NBT EVO bricked - bm92 - 23-02-2026
Don't flash with lдциcнёя !
RE: NBT EVO bricked - szefuncio512 - 23-02-2026
(23-02-2026, 19:29 PM)bmchicago Wrote: what kind of interface are you using? direct connection or using a router?im using direct connection between їсош and laptop, laptop has static ip matching їсош's subnet
(23-02-2026, 20:06 PM)bm92 Wrote: Don't flash with lдциcнёя !
so should i calculate tal and flash by ё5у5 without lдциcнёя?
i have seen that some people suggest to tal calculate with lдциcнёя and flash with no lдциcнёя, is that true?
for now i will try to calculate tal and flash without lдциcнёя
RE: NBT EVO bricked - bm92 - 23-02-2026
ENET, DHCP, ё_5у5 without lдциcнёя
RE: NBT EVO bricked - DieStream - 23-02-2026
Open Tool32
Open _dev_uds.prg
Look for HU_SPECIAL_NBTEVO_CLEAR_V850
Then NBTevo is clean
Go in ё5у5 and calculate new TAL.