CarTechnoloGY
VAGCOM106 (clone) - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VAGCOM106 (clone) (/showthread.php?tid=1175)

VAGCOM106 (clone) - zaki - 23-12-2013

Has anyone the 64bit driver for vagcom 106.(clonecable)I can not install the driver on my 64bit win 7hp.or some kind of bit converter/emulator?
thanks guys

RE: VAGCOM106 (clone) - mattydr67 - 23-12-2013

As I remember the VAG 10.6.0 itis able to be installe din 64 bits computer.
Maybe you have other problem there.
Check first if your tool it is recognozed into the Device Manager.
Check then if in the C:\Ross-Tech\VCDS you have 64 bits drivers
You can install it browsering to the C:\Ross-Tech\VCDS folder and install the driver manually.
But if your tool it is with FTDI RL then I suppose that you cannot use it in 64 bits computer because the loader it is only for 32 bits as I remember well.
But as allways you can check and replay with review
Good luck

P.S. - you can download the lastest version of VCDS and installed then you have to copy in other folder the 64 bits driver, then you have to uninstall this version of VCDS then you ahve to reboot and installe after this the VCDS 10.6.0 for your tool and when you need to install the drivers you can use the folder with 64 bits drivers that you allready had copy it in other folder

RE: VAGCOM106 (clone) - perotok - 23-12-2013

(23-12-2013, 11:20 AM)zaki Wrote:  Has anyone the 64bit driver for vagcom 106.(clonecable)I can not install the driver on my 64bit win 7hp.or some kind of bit converter/emulator?
thanks guys

Mate

try this

vcds 10.6.4 win7_64Bit Driver.rar
File Type: .rar
Downloaded: 251 times
Size: 1.13 MB



enjoy

RE: VAGCOM106 (clone) - zaki - 24-12-2013

Thanks for your help guys, i installed the 64bit driver.i dont think it's a tool with FTDI RL
because windows recognize it now. but now when i do the test,
the program dont recognize the cable."interface not found"
any suggestions? it's a dual-k & can<-> usb vag/iso interface.

thanks anyway
(sorry for faults my english is not so well)

RE: VAGCOM106 (clone) - perotok - 24-12-2013

(24-12-2013, 15:05 PM)zaki Wrote:  Thanks for your help guys, i installed the 64bit driver.i dont think it's a tool with FTDI RL
because windows recognize it now. but now when i do the test,
the program dont recognize the cable."interface not found"
any suggestions? it's a dual-k & can<-> usb vag/iso interface.

thanks anyway
(sorry for faults my english is not so well)

Mate hi

open cable and read the label on the FTDI chip or take a picture and put here

enjoy

RE: VAGCOM106 (clone) - zaki - 24-12-2013

Hi,thanks for the fast response,
EFTDI
1122-c
GN091261
FT232RL

RE: VAGCOM106 (clone) - perotok - 24-12-2013

(24-12-2013, 16:27 PM)zaki Wrote:  Hi,thanks for the fast response,
EFTDI
1122-c
GN091261
FT232RL

FT232RL cable can not work with the original sw (this means that you must have a loader for this version of VCDS)

Our friend Matty has already said that the loader can not work with x64 versions of Windows. shake

Conclusion idea
You must have a loader and VCDS must be installed on x86 version of Windows

Cheers drink

RE: VAGCOM106 (clone) - zaki - 24-12-2013

Now it make sense.fail
thanks man, me like!

RE: VAGCOM106 (clone) - mattydr67 - 25-12-2013

@zaki
Mate check the VID/PID of your interface in the Device Manager
It must be 0403/FA24
What version it is your tool?
VCDS 10.6.0 or 10.6.4 ( both are 10.6 version ) but if you have dump for 10.6.0 this one will not works with 10.6.4 softwear.
Only use the driver from softwear posted by Mr. Perotok in your VCDS softwear.
come back with review
Good luck

Merry X-Mas to everyone