+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: BMW e36 immo off (/showthread.php?tid=11750)
BMW e36 immo off - Lucian Mc - 02-12-2015
Can somebody help me with an immo off solution for an bmw 318 1995 . Ews emulator does not work..... Eeprom file in atachment .
Thanks in advance.
RE: BMW e36 immo off - hatmen11 - 03-12-2015
Which eeprom you read?
did you read 27C256? if not, read it and post it
RE: BMW e36 immo off - ap90500 - 03-12-2015
The dump is empty.
RE: BMW e36 immo off - Lucian Mc - 03-12-2015
It is 27c512. This is the dump read original
RE: BMW e36 immo off - hatmen11 - 03-12-2015
Try this mate
check pm
RE: BMW e36 immo off - Lucian Mc - 04-12-2015
This does not work. Im getting frustrated with this car.... WIth an 316i ecu with immo off it starts but cannot hold the idle...
RE: BMW e36 immo off - bram380 - 05-12-2015
Read MCU EWS and post here.
I will help to match ews-dme for start the car
RE: BMW e36 immo off - daniersms - 05-12-2015
(04-12-2015, 21:18 PM)Lucian Mc Wrote: This does not work. Im getting frustrated with this car.... WIth an 316i ecu with immo off it starts but cannot hold the idle...
I know this is actually not right but try to put a gasket between the idling actuator and intake to block the air-holes and set the idling manually.I have done it before and it worked well
RE: BMW e36 immo off - budzasto - 05-12-2015
Post it file "an 316i ecu with immo off it starts but cannot hold the idle..." without pass
I have same problem and I fix it or view my post to try solve your problem.
http://cartechnology.co.uk/showthread.php?tid=11760