[Question] ISTA D - History of faults - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: [Question] ISTA D - History of faults (/showthread.php?tid=11777) |
[Question] ISTA D - History of faults - jaramillo - 03-12-2015 Hi everyone, I´m just asking if a car logs all the previous faults that were deleted and if its possible to look them via ISTAD. I'm asking that, because I have saw that when a fault occurs, the frequency of the fault is stored. Thanks in advance, RE: [Question] ISTA D - History of faults - jaramillo - 07-12-2015 Anybody could please help me? RE: [Question] ISTA D - History of faults - pimposh - 10-12-2015 Once DTCs are removed they are no longer could be read again. Of course if you removed them via ISTA/d, restore session that was used for deleting and you would find them. If your ISTA/d do not store session history - reinstall. RE: [Question] ISTA D - History of faults - inspi1981 - 11-12-2015 Or simply print out Operation report for You record RE: [Question] ISTA D - History of faults - cardev - 01-09-2016 I am using the Rheingold 3.55.11.16402, but there is no single previous vehicle in the history list (Operatoins/Finished). Can anybody help that the previous diagnosed cars are available including the related Operation Reports? Thanks RE: [Question] ISTA D - History of faults - rafi-88 - 07-09-2016 1. Check if the FASTA is enabled in config: keyword '<add key="FASTAEnabled" value="true" />'. 2. If you have standalone version you need this to open protocols: http://cartechnology.co.uk/showthread.php?tid=10534&highlight=OrderDataView |