+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G30 6U3+MGU retrofit - TAL processing with two Kombi and HwDeinstall (/showthread.php?tid=118337)
G30 6U3+MGU retrofit - TAL processing with two Kombi and HwDeinstall - sanekmasternsk - 28-04-2026
Hi! My 2019 BMW G30 was retrofitted with a DKOMBI4 instrument cluster, MGU, and RAM. It had a DKOMBI2 and EntryNav2. The TAL calculation shows two instrument clusters on the 0x60 address and HwDeinstall. The component protection is NOT yet removed. Is this normal behavior in the TAL calculation without removing the component protection?
RE: G30 6U3+MGU retrofit - TAL processing with two Kombi and HwDeinstall - atiwok - 28-04-2026
you have to change vo
RE: G30 6U3+MGU retrofit - TAL processing with two Kombi and HwDeinstall - DieStream - 28-04-2026
Change VO, Timestamp and i-Step Shipment
RE: G30 6U3+MGU retrofit - TAL processing with two Kombi and HwDeinstall - sanekmasternsk - 28-04-2026
Thank you, frends