+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F30 Fem eeprom problem (/showthread.php?tid=119104)
F30 Fem eeprom problem - eelkar - 19-05-2026
I have a small problem. I'm using a BMW F30 FEM. I've been adding a key to the FEM. I know the Xhorse BIM Tool procedure and have done a lot of them. After preparing the EEP, an error occurred during the update. Playing the EEP mod again doesn't help. The FEM doesn't always connect and doesn't accept keys, as if VVDI Prog misread the 95128 code. Is there any way to read the data from the FEM?
RE: F30 Fem eeprom problem - PeGaSo32a - 20-05-2026
Flash it with ё5у5, then restart VVDI procedure.
RE: F30 Fem eeprom problem - eelkar - 20-05-2026
I can't do anything. It crashes due to lack of communication. The power relay clicks periodically, slower than without the Eprom. It looks like the FEM is faulty.