+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio , NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Stage 1 / Remap for їvёc0 EDC7C1 (0281010253) - Software P_1684.1.2 after engine swap (/showthread.php?tid=119436)
Stage 1 / Remap for їvёc0 EDC7C1 (0281010253) - Software P_1684.1.2 after engine swap - NTec - 29-05-2026
Hi everyone,
I need some help modifying a file for an їvёc0 truck.
The vehicle has recently undergone an engine swap where the original engine was replaced with a more powerful 280HP variant. However, due to CAN Bus / vehicle networking compatibility issues with the newer donor ECU (which completely blocks the pneumatic system and chasis VCM), I am strictly keeping the truck's original 2002 Engine ECU and software base.
To make the most out of the new engine block without triggering any network conflicts, I want to upgrade/remap the original file to match the physical engine performance.
ECU Details:
- Hardware: B05cн EDC7C1 - 0 281 010 253 (їvёc0 4898111)
- Software Version: P_1684.1.2 (Original 2002 baseline file)
Could someone help me with a proper Stage 1 / optimization built specifically over this software skeleton so the engine performs correctly with the new displacement/power setup while keeping all chasis features active?
| full bdm ori ktag.zip | ||
| File Type: |
|
 |
| Downloaded: | 1 times | |
| Size: | 354.97 KB | |