CarTechnoloGY
Bench setup using zgw for nbt evo - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Bench setup using zgw for nbt evo (/showthread.php?tid=119788)

Bench setup using zgw for nbt evo - Ryn079 - 09-06-2026

Good evening,

I am trying to bench test an nbt Evo using zgw. I can see both zgw and Evo in ё5у5 but Evo is with a black screen and no fan running.  Also I can't ping any of the IP addresses of Evo.  oabr is connected and I noticed that pin 18 in zgw is connected to both oabr and enet cable.

Can someone please help?

RE: Bench setup using zgw for nbt evo - user_530d - 09-06-2026

What you can see in ё5у5 from EVO? Can you take Screenshot

RE: Bench setup using zgw for nbt evo - Ryn079 - 10-06-2026

I managed to get the nbt Evo to ping. Problem is I still have a black screen. Does it need a wakeup signal? I am only connected to a zgw.

Thanks

RE: Bench setup using zgw for nbt evo - user_530d - 10-06-2026

You need ignition, emulator, can bridge, cas or whatever

RE: Bench setup using zgw for nbt evo - Ryn079 - 10-06-2026

(10-06-2026, 07:03 AM)user_530d Wrote:  You need ignition, emulator, can bridge, cas or whatever

thanks, i just added cas.

is there a command in tool32 for ignition on?


thanks

RE: Bench setup using zgw for nbt evo - Ryn079 - 11-06-2026

Good afternoon, 

i added cas with keys and start button, but for some reason my nbt evo is still not turning on on bench.  my setup consists of zgw, cas with key and start button and steering column receiver, nbt evo and screen. i can see all three modules in ё5у5 and i can also ping nbt evo on both addresses.

Am i missing something please?

thanks

RE: Bench setup using zgw for nbt evo - user_530d - 11-06-2026

EVO, Which iLevel, which display, APIX1, APIX2, correctly coded (gateway table)….

RE: Bench setup using zgw for nbt evo - that4chanняскёя - 21-06-2026

make sure you have kombi connected to PT can and K Can and MOST

RE: Bench setup using zgw for nbt evo - Vanness - 21-07-2026

(11-06-2026, 12:40 PM)Ryn079 Wrote:  Good afternoon, 

i added cas with keys and start button, but for some reason my nbt evo is still not turning on on bench.  my setup consists of zgw, cas with key and start button and steering column receiver, nbt evo and screen.  i can see all three modules in ё5у5 and i can also ping nbt evo on both addresses.

Am i missing something please?

thanks

CAS turn on KL 15
Tool32=>DEV_UDS=>CAS_SET_CKAMPS=>Aeguments=>2