CarProg All Questions/Answers Here! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: CarProg All Questions/Answers Here! (/showthread.php?tid=12004) |
RE: CarProg 8.21 - MED05 - 24-12-2016 Hi please activ :66C66-D0808-0B006-A34C1 RE: CarProg 8.21 - islamnicola28 - 24-12-2016 Please for me unlock carprog 3C1D6-D08DE-A6006-A6984 Read eeprom 24c32 with carprog pins? - mitsakos5800 - 25-12-2016 Hi friends merry christmas! Can someone exactly the Pins (colors) told me to read 24c32 with adapter a6? and which side hang the cables; the a4 do not read me anything RE: Read eeprom 24c32 with carprog pins? - doslamer - 25-12-2016 Adapter A4 = adapter A6 by colors, but if do not upgrade your firmware of carprog with new one, you will never read 24xxx memory. Firmware till version 4.74 can not read 24xxx - china clone "bug" (bad firmware). RE: Read eeprom 24c32 with carprog pins? - domelec - 25-12-2016 Double check the pinout inside the cable most need rewiring (mine did) RE: CarProg 8.21 - domelec - 25-12-2016 (24-12-2016, 20:52 PM)MED05 Wrote: Hi please activ :66C66-D0808-0B006-A34C1 name: MED05 E3HQJ6AF8GWE7WNPRMSR3J7U9999J5U28BAW9ZMVRVKNMRJC79DKF5ABETVL44TK9V (24-12-2016, 21:09 PM)islamnicola28 Wrote: Please for me name:islamnicola28 HJVWFUT5BJHC2VRNUUGVHNGSVFNNW4Q7Q9C3PZ4QEJN39Z59P2WX9JCUNR53Y2ZMLY RE: Read eeprom 24c32 with carprog pins? - darek_naprawa - 25-12-2016 (25-12-2016, 08:22 AM)mitsakos5800 Wrote: Hi friends merry christmas!Wrong. Read from the power supply. RE: Read eeprom 24c32 with carprog pins? - mitsakos5800 - 25-12-2016 Thanks for replay friends! I do not know what the right hand to properly put the pins on eeprom also, there is a diy for the upgrade? this: https://m.aliexpress.com/item/32778186163.html?trace=wwwdetail2mobilesitedetail&productId=32778186163&productSubject=32778186163&shortkey=Ybqaayi2&addresstype=600. is ok?online with all functions active? (25-12-2016, 09:53 AM)domelec Wrote: Double check the pinout inside the cable I checked it inside and there is not any cable that has come out or loosen RE: Read eeprom 24c32 with carprog pins? - domelec - 25-12-2016 It didn't say anything about connections being loose or Brocken I said check the wiring is same as original I.e. Red wire is in same place as original red wire etc etc Look at the schematic of the cable posted above and then open your a4 25pin connector and see if they are the same Also remember when you wire the a4 correctly as shown above too, you also need to connect 12v supply to carprog RE: Read eeprom 24c32 with carprog pins? - mitsakos5800 - 25-12-2016 In the photo that follows below could please tell me, at which side do the cables go? |