CarTechnoloGY
CarProg All Questions/Answers Here! - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: CarProg All Questions/Answers Here! (/showthread.php?tid=12004)



RE: CarProg All Questions/Answers Here! - easycome - 08-04-2018

hi, is it possible to reflash to carprog in jtag with resistors?
if someone can help me with a schematic and settings

thx.


RE: CarProg All Questions/Answers Here! - easycome - 08-04-2018

I found, solved,


RE: CarProg All Questions/Answers Here! - Ensoniq - 14-04-2018

Can carprog original and clone both work on same computer ?

I have carprog original
but just bought chinese carprog clone so i can use cracked carprog software.


RE: CarProg All Questions/Answers Here! - frankrayk - 14-04-2018

(14-04-2018, 12:05 PM)borshch Wrote:  Can carprog original and clone both work on same computer ?

I have carprog original
but just bought chinese carprog clone so i can use cracked carprog software.

Yes you can, in different folders.


RE: CarProg All Questions/Answers Here! - Przemo - 19-04-2018

I would like to buy a carprog or do you know the link from aliexpress? One that will not require too much interference in the equipment? I will be grateful for the link.


RE: CarProg All Questions/Answers Here! - danngrigore - 19-04-2018

Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks


RE: CarProg All Questions/Answers Here! - dleer2007 - 21-04-2018

E8F16-D08DE-A6006-AD2A8

Car

Carprog 8.21

thanks


RE: CarProg All Questions/Answers Here! - maciek007 - 23-04-2018

(21-04-2018, 21:50 PM)dleer2007 Wrote:  E8F16-D08DE-A6006-AD2A8

Car

Carprog 8.21

thanks


abc
GKSMBZ4YGN2SFXV5Q8KEM8Y8MATWDHKMFXRDZ2KYW8AJ5WLJ6295PH3ZXYYBLCF2GX


RE: CarProg All Questions/Answers Here! - domelec - 25-04-2018

(19-04-2018, 17:58 PM)danngrigore Wrote:  Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks


the problem you have is that the mcu is not programmed
if no serial is there then programming is wrong


problem carprog 7.81 , help !! - javi225 - 11-05-2018

problem with Chinese carprog, it never worked, supposedly it was version 7.81, is there any way to repair it and upload it from version ??