CarProg All Questions/Answers Here! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: CarProg All Questions/Answers Here! (/showthread.php?tid=12004) |
RE: CarProg All Questions/Answers Here! - Breket - 27-06-2018 (13-06-2018, 08:19 AM)Breket Wrote: Hello, Hi again, today I made A9 adapter and tomorrow I plan to rework unit. Before rework I make hardware test and it says OK (with external power supply and 9-10V) Few months ago I make this test on borrowed adapter, in other conditions, power supply from car and without success. So, I wonder is this normal? I know this CARPROG can't read 9x eeproms, A1 can't connect... RE: CarProg All Questions/Answers Here! - Willail - 29-06-2018 (31-08-2015, 18:29 PM)DIMITYRMILEV Wrote: Change 4pcs 74hc125 whit 74hct125M smd in your carprog , and all will by ok. Hello, change the 4 IC 74HC125D is the only modification to rework carprog 7.28? Thanks for your help RE: CarProg All Questions/Answers Here! - 23Andi23 - 29-06-2018 (29-06-2018, 04:51 AM)Willail Wrote:(31-08-2015, 18:29 PM)DIMITYRMILEV Wrote: Change 4pcs 74hc125 whit 74hct125M smd in your carprog , and all will by ok. What not work? Antenna is working? Can bus is working? RE: CarProg All Questions/Answers Here! - Willail - 29-06-2018 (15-12-2015, 03:41 AM)XmoDDeR Wrote: Well tacho2008 works i know that and half of mexico, india and other countries where that tool is still used and held in high regard. i would use it myself all the time but other stuff is closer in reach. Hello, Do you have already reworked clone carprog V7.28? Thanks (15-12-2015, 04:13 AM)fisekovic Wrote: First and most important of all is to change 74HC125D to 74HCT125M on your carparog, i have good clone (good pcb) but still did not read some I2C,95 ,MCU. I bought 74HCT125M at farnell change all 4 of them and it is ok now. reading without problems. Hello, What's a good pcb of carprog? COuld you send me a picture? Yhanks RE: CarProg All Questions/Answers Here! - 23Andi23 - 29-06-2018 (29-06-2018, 10:00 AM)Willail Wrote: Hello, Look one Page back post nr. 780 in this thread https://cartechnology.co.uk/showthread.php?tid=12004&pid=347509#pid347509 Most people flash to 8.21 and make rework like on many pictures in this thread RE: CarProg All Questions/Answers Here! - Willail - 30-06-2018 (25-12-2016, 08:55 AM)doslamer Wrote: Adapter A4 = adapter A6 by colors, but if do not upgrade your firmware of carprog with new one, you will never read 24xxx memory. Firmware till version 4.74 can not read 24xxx - china clone "bug" (bad firmware). Hello, I have a clone carprog 7.28 but i don"t know the version of the firmware. Do you think that is impossible to read 24xxx eprooms even if i change the 4 IC 74HC125D by 74HCT125M. Thanks RE: CarProg All Questions/Answers Here! - dil6222 - 30-06-2018 (30-06-2018, 04:49 AM)Willail Wrote:(25-12-2016, 08:55 AM)doslamer Wrote: Adapter A4 = adapter A6 by colors, but if do not upgrade your firmware of carprog with new one, you will never read 24xxx memory. Firmware till version 4.74 can not read 24xxx - china clone "bug" (bad firmware). That's 1 of a few mods you can do you can try this but I haven't tested it. RE: CarProg All Questions/Answers Here! - kastanka - 02-07-2018 (30-06-2018, 17:27 PM)dil6222 Wrote:(30-06-2018, 04:49 AM)Willail Wrote:(25-12-2016, 08:55 AM)doslamer Wrote: Adapter A4 = adapter A6 by colors, but if do not upgrade your firmware of carprog with new one, you will never read 24xxx memory. Firmware till version 4.74 can not read 24xxx - china clone "bug" (bad firmware). i tested it and work perfect. RE: CarProg All Questions/Answers Here! - m1t1k1 - 03-07-2018 Hello, how can i change the firmware of the carprog with the galletto 54 ? RE: CarProg All Questions/Answers Here! - 23Andi23 - 03-07-2018 (03-07-2018, 10:52 AM)m1t1k1 Wrote: Hello, how can i change the firmware of the carprog with the galletto 54 ? You need JLINK programmer to upgrade FW on carprog |