Have the F-SERIES also MOST connection? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Have the F-SERIES also MOST connection? (/showthread.php?tid=12271) |
Have the F-SERIES also MOST connection? - Bimmer540 - 27-12-2015 Have the F-SERIES also MOST connection? And what type of F-SERIES an location of connector. RE: Have the F-SERIES also MOST connection? - SweetBMW - 27-12-2015 There is a most circuit. But it's only Ethernet connection to gateway and between modules. No must direct access port RE: Have the F-SERIES also MOST connection? - Bimmer540 - 27-12-2015 (27-12-2015, 17:06 PM)SweetBMW Wrote: There is a most circuit. But it's only Ethernet connection to gateway and between modules. No must direct access port Is it possible to program the MOST units with Ethernet connection and ISTA-P. RE: Have the F-SERIES also MOST connection? - masa52 - 27-12-2015 ethernet its only one option to program the car RE: Have the F-SERIES also MOST connection? - SweetBMW - 27-12-2015 (27-12-2015, 17:20 PM)snypertje Wrote:(27-12-2015, 17:06 PM)SweetBMW Wrote: There is a most circuit. But it's only Ethernet connection to gateway and between modules. No must direct access port Yes , as mentioned above me: So programming F series is only done with Ethernet. Its by ethernet to the gateway module, and then it gets "translated" to the other control units on the Most bus internally. |